[Buildroot] [PATCH v2 3/3] package/gcc: remove gcc 4.8

Romain Naour romain.naour at gmail.com
Tue May 23 20:24:40 UTC 2017


We're already using 5.x as default, and have 4.9.x on the lower side
together with 7.x (7.1) on the higher side.

Signed-off-by: Romain Naour <romain.naour at gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 Config.in.legacy                                   |  10 +
 ...et-68059-libgcc-should-not-use-__write-fo.patch |  43 --
 package/gcc/4.8.5/100-uclibc-conf.patch            |  15 -
 ...00-powerpc-link-with-math-lib.patch.conditional | 122 ----
 package/gcc/4.8.5/111-pr65730.patch                |  37 --
 ...gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch |  29 -
 package/gcc/4.8.5/130-fix_build_with_gcc-6.patch   | 153 -----
 package/gcc/4.8.5/130-pr43538.patch                |  25 -
 package/gcc/4.8.5/301-missing-execinfo_h.patch     |  13 -
 .../gcc/4.8.5/305-libmudflap-susv3-legacy.patch    |  49 --
 package/gcc/4.8.5/810-arm-softfloat-libgcc.patch   |  30 -
 package/gcc/4.8.5/830-arm_unbreak_armv4t.patch     |  13 -
 package/gcc/4.8.5/841-PR57717-E500v2.patch         |  23 -
 package/gcc/4.8.5/842-PR60155.patch                | 111 ----
 .../4.8.5/843-aarch64-vmlaq_lane_s32-typo.patch    |  24 -
 package/gcc/4.8.5/850-libstdcxx-uclibc-c99.patch   | 273 ---------
 package/gcc/4.8.5/851-PR-other-56780.patch         | 244 --------
 .../870-xtensa-add-mauto-litpools-option.patch     | 290 ---------
 .../871-xtensa-reimplement-register-spilling.patch |  76 ---
 ...unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch |  33 --
 .../gcc/4.8.5/873-xtensa-fix-_Unwind_GetCFA.patch  |  40 --
 .../gcc/4.8.5/874-xtensa-add-uclinux-support.patch | 174 ------
 package/gcc/4.8.5/890-fix-m68k-compile.patch       |  15 -
 package/gcc/4.8.5/891-fix-m68k-uclinux.patch       |  18 -
 package/gcc/4.8.5/900-musl-support.patch           | 648 ---------------------
 .../930-libgcc-disable-split-stack-nothreads.patch |  14 -
 package/gcc/4.8.5/940-uclinux-enable-threads.patch |  19 -
 package/gcc/Config.in.host                         |  24 -
 package/uclibc/uclibc.mk                           |   6 -
 29 files changed, 10 insertions(+), 2561 deletions(-)
 delete mode 100644 package/gcc/4.8.5/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch
 delete mode 100644 package/gcc/4.8.5/100-uclibc-conf.patch
 delete mode 100644 package/gcc/4.8.5/1000-powerpc-link-with-math-lib.patch.conditional
 delete mode 100644 package/gcc/4.8.5/111-pr65730.patch
 delete mode 100644 package/gcc/4.8.5/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch
 delete mode 100644 package/gcc/4.8.5/130-fix_build_with_gcc-6.patch
 delete mode 100644 package/gcc/4.8.5/130-pr43538.patch
 delete mode 100644 package/gcc/4.8.5/301-missing-execinfo_h.patch
 delete mode 100644 package/gcc/4.8.5/305-libmudflap-susv3-legacy.patch
 delete mode 100644 package/gcc/4.8.5/810-arm-softfloat-libgcc.patch
 delete mode 100644 package/gcc/4.8.5/830-arm_unbreak_armv4t.patch
 delete mode 100644 package/gcc/4.8.5/841-PR57717-E500v2.patch
 delete mode 100644 package/gcc/4.8.5/842-PR60155.patch
 delete mode 100644 package/gcc/4.8.5/843-aarch64-vmlaq_lane_s32-typo.patch
 delete mode 100644 package/gcc/4.8.5/850-libstdcxx-uclibc-c99.patch
 delete mode 100644 package/gcc/4.8.5/851-PR-other-56780.patch
 delete mode 100644 package/gcc/4.8.5/870-xtensa-add-mauto-litpools-option.patch
 delete mode 100644 package/gcc/4.8.5/871-xtensa-reimplement-register-spilling.patch
 delete mode 100644 package/gcc/4.8.5/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch
 delete mode 100644 package/gcc/4.8.5/873-xtensa-fix-_Unwind_GetCFA.patch
 delete mode 100644 package/gcc/4.8.5/874-xtensa-add-uclinux-support.patch
 delete mode 100644 package/gcc/4.8.5/890-fix-m68k-compile.patch
 delete mode 100644 package/gcc/4.8.5/891-fix-m68k-uclinux.patch
 delete mode 100644 package/gcc/4.8.5/900-musl-support.patch
 delete mode 100644 package/gcc/4.8.5/930-libgcc-disable-split-stack-nothreads.patch
 delete mode 100644 package/gcc/4.8.5/940-uclinux-enable-threads.patch

diff --git a/Config.in.legacy b/Config.in.legacy
index 0bacac2..a5f7288 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -143,6 +143,16 @@ comment "----------------------------------------------------"
 endif
 
 ###############################################################################
+comment "Legacy options removed in 2017.08"
+
+config BR2_GCC_VERSION_4_8_X
+	bool "gcc 4.8.x support removed"
+	select BR2_LEGACY
+	help
+	  Support for gcc version 4.8.x has been removed. The current
+	  default version (5.x or later) has been selected instead.
+
+###############################################################################
 comment "Legacy options removed in 2017.05"
 
 config BR2_PACKAGE_SUNXI_MALI_R2P4
diff --git a/package/gcc/4.8.5/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch b/package/gcc/4.8.5/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch
deleted file mode 100644
index d8c6723..0000000
--- a/package/gcc/4.8.5/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From edb9057c195c41dd7bcd8603e5fd420359edd520 Mon Sep 17 00:00:00 2001
-From: nsz <nsz at 138bc75d-0d04-0410-961f-82ee72b054a4>
-Date: Mon, 23 Nov 2015 15:17:55 +0000
-Subject: [PATCH] [ARM] PR target/68059 libgcc should not use __write for
- printing fatal error
-
-libgcc/
-	PR target/68059
-	* config/arm/linux-atomic-64bit.c (__write): Rename to...
-	(write): ...this and fix the return type.
-
-git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230762 138bc75d-0d04-0410-961f-82ee72b054a4
-
-Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
----
- libgcc/config/arm/linux-atomic-64bit.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/libgcc/config/arm/linux-atomic-64bit.c b/libgcc/config/arm/linux-atomic-64bit.c
-index 7aa8dfc..570b4ce 100644
---- a/libgcc/config/arm/linux-atomic-64bit.c
-+++ b/libgcc/config/arm/linux-atomic-64bit.c
-@@ -33,7 +33,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
-    kernels; we check for that in an init section and bail out rather
-    unceremoneously.  */
- 
--extern unsigned int __write (int fd, const void *buf, unsigned int count);
-+extern int write (int fd, const void *buf, unsigned int count);
- extern void abort (void);
- 
- /* Kernel helper for compare-and-exchange.  */
-@@ -56,7 +56,7 @@ static void __check_for_sync8_kernelhelper (void)
- 	 for the user - I'm not sure I can rely on much else being
- 	 available at this point, so do the same as generic-morestack.c
- 	 write () and abort ().  */
--      __write (2 /* stderr.  */, err, sizeof (err));
-+      write (2 /* stderr.  */, err, sizeof (err));
-       abort ();
-     }
- };
--- 
-2.10.2
-
diff --git a/package/gcc/4.8.5/100-uclibc-conf.patch b/package/gcc/4.8.5/100-uclibc-conf.patch
deleted file mode 100644
index d56bf0a..0000000
--- a/package/gcc/4.8.5/100-uclibc-conf.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: gcc-4.8.0/contrib/regression/objs-gcc.sh
-===================================================================
---- gcc-4.8.0.orig/contrib/regression/objs-gcc.sh	2009-04-09 17:00:19.000000000 +0200
-+++ gcc-4.8.0/contrib/regression/objs-gcc.sh	2013-03-23 17:39:04.000000000 +0100
-@@ -106,6 +106,10 @@
-  then
-   make all-gdb all-dejagnu all-ld || exit 1
-   make install-gdb install-dejagnu install-ld || exit 1
-+elif [ $H_REAL_TARGET = $H_REAL_HOST -a $H_REAL_TARGET = i686-pc-linux-uclibc ]
-+ then
-+  make all-gdb all-dejagnu all-ld || exit 1
-+  make install-gdb install-dejagnu install-ld || exit 1
- elif [ $H_REAL_TARGET = $H_REAL_HOST ] ; then
-   make bootstrap || exit 1
-   make install || exit 1
diff --git a/package/gcc/4.8.5/1000-powerpc-link-with-math-lib.patch.conditional b/package/gcc/4.8.5/1000-powerpc-link-with-math-lib.patch.conditional
deleted file mode 100644
index b7094fe..0000000
--- a/package/gcc/4.8.5/1000-powerpc-link-with-math-lib.patch.conditional
+++ /dev/null
@@ -1,122 +0,0 @@
-http://gcc.gnu.org/ml/gcc-patches/2008-10/msg00269.html
-
-On glibc the libc.so carries a copy of the math function copysignl() but
-on uClibc math functions like copysignl() live in libm. Since libgcc_s
-contains unresolved symbols, any attempt to link against libgcc_s
-without explicitely specifying -lm fails, resulting in a broken
-bootstrap of the compiler.
-
-Forward port to gcc 4.5.1 by Gustavo Zacarias <gustavo at zacarias.com.ar>
-
----
- libgcc/Makefile.in  |    4 +++-
- libgcc/configure    |   32 ++++++++++++++++++++++++++++++++
- libgcc/configure.ac |   21 +++++++++++++++++++++
- 3 files changed, 56 insertions(+), 1 deletion(-)
-
-Index: gcc-4.8.0/libgcc/Makefile.in
-===================================================================
---- gcc-4.8.0.orig/libgcc/Makefile.in	2013-02-04 20:06:20.000000000 +0100
-+++ gcc-4.8.0/libgcc/Makefile.in	2013-03-24 09:12:43.000000000 +0100
-@@ -41,6 +41,7 @@
- decimal_float = @decimal_float@
- enable_decimal_float = @enable_decimal_float@
- fixed_point = @fixed_point@
-+LIBGCC_LIBM = @LIBGCC_LIBM@
- 
- host_noncanonical = @host_noncanonical@
- target_noncanonical = @target_noncanonical@
-@@ -927,9 +928,10 @@
- 		@multilib_dir@,$(MULTIDIR),$(subst \
- 		@shlib_objs@,$(objects) libgcc.a,$(subst \
- 		@shlib_base_name@,libgcc_s,$(subst \
-+		@libgcc_libm@,$(LIBGCC_LIBM),$(subst \
- 		@shlib_map_file@,$(mapfile),$(subst \
- 		@shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(subst \
--		@shlib_slibdir@,$(shlib_slibdir),$(SHLIB_LINK))))))))
-+		@shlib_slibdir@,$(shlib_slibdir),$(SHLIB_LINK)))))))))
- 
- libunwind$(SHLIB_EXT): $(libunwind-s-objects) $(extra-parts)
- 	# @multilib_flags@ is still needed because this may use
-Index: gcc-4.8.0/libgcc/configure
-===================================================================
---- gcc-4.8.0.orig/libgcc/configure	2012-11-05 00:08:42.000000000 +0100
-+++ gcc-4.8.0/libgcc/configure	2013-03-24 09:12:43.000000000 +0100
-@@ -564,6 +564,7 @@
- tmake_file
- sfp_machine_header
- set_use_emutls
-+LIBGCC_LIBM
- set_have_cc_tls
- vis_hide
- fixed_point
-@@ -4481,6 +4482,37 @@
- 	fi
- fi
- 
-+# On powerpc libgcc_s references copysignl which is a libm function but
-+# glibc apparently also provides it via libc as opposed to uClibc where
-+# it lives in libm.
-+echo "$as_me:$LINENO: checking for library containing copysignl" >&5
-+echo $ECHO_N "checking for library containing copysignl... $ECHO_C" >&6
-+if test "${libgcc_cv_copysignl_lib+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+    echo '#include <features.h>' > conftest.c
-+    echo 'int the_libc = __UCLIBC__ + __powerpc__;' >> conftest.c
-+    libgcc_cv_copysignl_lib="-lc"
-+    if { ac_try='${CC-cc} -S conftest.c -o conftest.s 1>&5'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }
-+    then
-+       libgcc_cv_copysignl_lib="-lm"
-+    fi
-+    rm -f conftest.*
-+
-+fi
-+echo "$as_me:$LINENO: result: $libgcc_cv_copysignl_lib" >&5
-+echo "${ECHO_T}$libgcc_cv_copysignl_lib" >&6
-+
-+case /${libgcc_cv_copysignl_lib}/ in
-+  /-lm/) LIBGCC_LIBM="$LIBGCC_LIBM -lm" ;;
-+  *) LIBGCC_LIBM= ;;
-+esac
- 
- # Conditionalize the makefile for this target machine.
- tmake_file_=
-Index: gcc-4.8.0/libgcc/configure.ac
-===================================================================
---- gcc-4.8.0.orig/libgcc/configure.ac	2012-10-15 15:10:30.000000000 +0200
-+++ gcc-4.8.0/libgcc/configure.ac	2013-03-24 09:12:43.000000000 +0100
-@@ -326,6 +326,27 @@
- fi
- AC_SUBST(set_have_cc_tls)
- 
-+# On powerpc libgcc_s references copysignl which is a libm function but
-+# glibc apparently also provides it via libc as opposed to uClibc where
-+# it lives in libm.
-+AC_CACHE_CHECK
-+  libgcc_cv_copysignl_lib,
-+    echo '#include <features.h>' > conftest.c
-+    echo 'int the_libc = __UCLIBC__ + __powerpc__;' >> conftest.c
-+    libgcc_cv_copysignl_lib="-lc"
-+    if AC_TRY_COMMAND(${CC-cc} -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD)
-+    then
-+       libgcc_cv_copysignl_lib="-lm"
-+    fi
-+    rm -f conftest.*
-+  ])
-+
-+case /${libgcc_cv_copysignl_lib}/ in
-+  /-lm/) LIBGCC_LIBM="$LIBGCC_LIBM -lm" ;;
-+  *) LIBGCC_LIBM= ;;
-+esac
-+AC_SUBST(LIBGCC_LIBM)
-+
- # See if we have emulated thread-local storage.
- GCC_CHECK_EMUTLS
- set_use_emutls=
diff --git a/package/gcc/4.8.5/111-pr65730.patch b/package/gcc/4.8.5/111-pr65730.patch
deleted file mode 100644
index f195e30..0000000
--- a/package/gcc/4.8.5/111-pr65730.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From b9a7775674d91c7af8043a83211ffeaa576327d7 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Fri, 10 Apr 2015 17:46:30 +0300
-Subject: [PATCH] Fix PR target/65730
-
-2015-05-20  Max Filippov  <jcmvbkbc at gmail.com>
-gcc/
-	* config/xtensa/xtensa.c (init_alignment_context): Replace MULT
-	by BITS_PER_UNIT with ASHIFT by exact_log2 (BITS_PER_UNIT).
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: svn+ssh://gcc.gnu.org/svn/gcc/trunk@223452
-Changes to ChangeLog are dropped.
-
- gcc/config/xtensa/xtensa.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
-index eb039ba..7296e36 100644
---- a/gcc/config/xtensa/xtensa.c
-+++ b/gcc/config/xtensa/xtensa.c
-@@ -1461,8 +1461,9 @@ init_alignment_context (struct alignment_context *ac, rtx mem)
-   if (ac->shift != NULL_RTX)
-     {
-       /* Shift is the byte count, but we need the bitcount.  */
--      ac->shift = expand_simple_binop (SImode, MULT, ac->shift,
--				       GEN_INT (BITS_PER_UNIT),
-+      gcc_assert (exact_log2 (BITS_PER_UNIT) >= 0);
-+      ac->shift = expand_simple_binop (SImode, ASHIFT, ac->shift,
-+				       GEN_INT (exact_log2 (BITS_PER_UNIT)),
- 				       NULL_RTX, 1, OPTAB_DIRECT);
-       ac->modemask = expand_simple_binop (SImode, ASHIFT,
- 					  GEN_INT (GET_MODE_MASK (mode)),
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch b/package/gcc/4.8.5/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch
deleted file mode 100644
index c11ad35..0000000
--- a/package/gcc/4.8.5/120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 9bf6066d588632dab9f78932df15b5b4140f31f3 Mon Sep 17 00:00:00 2001
-From: "Arnout Vandecappelle (Essensium/Mind)" <arnout at mind.be>
-Date: Fri, 6 Nov 2015 14:27:23 +0100
-Subject: [PATCH] gcc/config.gcc: fix typo for powerpc e6500 cpu_is_64bit
-
-Otherwise it is not recognized as a 64-bit powerpc and gcc will not generate
-64-bit binaries by default.
-
-Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
----
- gcc/config.gcc | 2 +-
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/gcc/config.gcc b/gcc/config.gcc
-index 4a7cbd2..9cc765e 100644
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -439,7 +439,7 @@ powerpc*-*-*)
- 	cpu_type=rs6000
- 	extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h htmintrin.h htmxlintrin.h"
- 	case x$with_cpu in
--	    xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345678]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|Xe6500)
-+	    xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345678]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500)
- 		cpu_is_64bit=yes
- 		;;
- 	esac
--- 
-2.6.2
-
diff --git a/package/gcc/4.8.5/130-fix_build_with_gcc-6.patch b/package/gcc/4.8.5/130-fix_build_with_gcc-6.patch
deleted file mode 100644
index 62ac3cb..0000000
--- a/package/gcc/4.8.5/130-fix_build_with_gcc-6.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 1e5f1089dec3af328fd03125d6778f666d0bd4e4 Mon Sep 17 00:00:00 2001
-From: edlinger <edlinger at 138bc75d-0d04-0410-961f-82ee72b054a4>
-Date: Thu, 25 Feb 2016 15:33:50 +0000
-Subject: [PATCH 1/1] 2016-02-25  Bernd Edlinger  <bernd.edlinger at hotmail.de>
-
-        Backported from mainline
-        2016-02-19  Jakub Jelinek  <jakub at redhat.com>
-                    Bernd Edlinger  <bernd.edlinger at hotmail.de>
-
-        * Make-lang.in: Invoke gperf with -L C++.
-        * cfns.gperf: Remove prototypes for hash and libc_name_p
-        inlines.
-        * cfns.h: Regenerated.
-        * except.c (nothrow_libfn_p): Adjust.
-
-
-git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/branches/gcc-5-branch@233720 138bc75d-0d04-0410-961f-82ee72b054a4
-
-Signed-off-by: Samuel Martin <s.martin49 at gmail.com>
----
- gcc/cp/Make-lang.in |    2 +-
- gcc/cp/cfns.gperf   |   10 ++--------
- gcc/cp/cfns.h       |   41 ++++++++++++++---------------------------
- gcc/cp/except.c     |    3 ++-
- 5 files changed, 31 insertions(+), 37 deletions(-)
-
-diff --git a/gcc/cp/Make-lang.in b/gcc/cp/Make-lang.in
-index e98beb1..b09fb02 100644
---- a/gcc/cp/Make-lang.in
-+++ b/gcc/cp/Make-lang.in
-@@ -111,7 +111,7 @@ else
- # deleting the $(srcdir)/cp/cfns.h file.
- $(srcdir)/cp/cfns.h:
- endif
--	gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' -L ANSI-C \
-+	gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' -L C++ \
- 		$(srcdir)/cp/cfns.gperf --output-file $(srcdir)/cp/cfns.h
- 
- #
-diff --git a/gcc/cp/cfns.gperf b/gcc/cp/cfns.gperf
-index 68acd3d..214ecf6 100644
---- a/gcc/cp/cfns.gperf
-+++ b/gcc/cp/cfns.gperf
-@@ -1,3 +1,5 @@
-+%language=C++
-+%define class-name libc_name
- %{
- /* Copyright (C) 2000-2015 Free Software Foundation, Inc.
- 
-@@ -16,14 +18,6 @@ for more details.
- You should have received a copy of the GNU General Public License
- along with GCC; see the file COPYING3.  If not see
- <http://www.gnu.org/licenses/>.  */
--#ifdef __GNUC__
--__inline
--#endif
--static unsigned int hash (const char *, unsigned int);
--#ifdef __GNUC__
--__inline
--#endif
--const char * libc_name_p (const char *, unsigned int);
- %}
- %%
- # The standard C library functions, for feeding to gperf; the result is used
-diff --git a/gcc/cp/cfns.h b/gcc/cp/cfns.h
-index 1c6665d..596f413 100644
---- a/gcc/cp/cfns.h
-+++ b/gcc/cp/cfns.h
-@@ -1,5 +1,5 @@
--/* ANSI-C code produced by gperf version 3.0.3 */
--/* Command-line: gperf -o -C -E -k '1-6,$' -j1 -D -N libc_name_p -L ANSI-C cfns.gperf  */
-+/* C++ code produced by gperf version 3.0.4 */
-+/* Command-line: gperf -o -C -E -k '1-6,$' -j1 -D -N libc_name_p -L C++ --output-file cfns.h cfns.gperf  */
- 
- #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
-       && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
-@@ -28,7 +28,7 @@
- #error "gperf generated tables don't work with this execution character set. Please report a bug to <bug-gnu-gperf at gnu.org>."
- #endif
- 
--#line 1 "cfns.gperf"
-+#line 3 "cfns.gperf"
- 
- /* Copyright (C) 2000-2015 Free Software Foundation, Inc.
- 
-@@ -47,25 +47,18 @@ for more details.
- You should have received a copy of the GNU General Public License
- along with GCC; see the file COPYING3.  If not see
- <http://www.gnu.org/licenses/>.  */
--#ifdef __GNUC__
--__inline
--#endif
--static unsigned int hash (const char *, unsigned int);
--#ifdef __GNUC__
--__inline
--#endif
--const char * libc_name_p (const char *, unsigned int);
- /* maximum key range = 391, duplicates = 0 */
- 
--#ifdef __GNUC__
--__inline
--#else
--#ifdef __cplusplus
--inline
--#endif
--#endif
--static unsigned int
--hash (register const char *str, register unsigned int len)
-+class libc_name
-+{
-+private:
-+  static inline unsigned int hash (const char *str, unsigned int len);
-+public:
-+  static const char *libc_name_p (const char *str, unsigned int len);
-+};
-+
-+inline unsigned int
-+libc_name::hash (register const char *str, register unsigned int len)
- {
-   static const unsigned short asso_values[] =
-     {
-@@ -122,14 +115,8 @@ hash (register const char *str, register unsigned int len)
-   return hval + asso_values[(unsigned char)str[len - 1]];
- }
- 
--#ifdef __GNUC__
--__inline
--#ifdef __GNUC_STDC_INLINE__
--__attribute__ ((__gnu_inline__))
--#endif
--#endif
- const char *
--libc_name_p (register const char *str, register unsigned int len)
-+libc_name::libc_name_p (register const char *str, register unsigned int len)
- {
-   enum
-     {
-diff --git a/gcc/cp/except.c b/gcc/cp/except.c
-index 3ff1ce6..2f2e396 100644
---- a/gcc/cp/except.c
-+++ b/gcc/cp/except.c
-@@ -1040,7 +1040,8 @@ nothrow_libfn_p (const_tree fn)
-      unless the system headers are playing rename tricks, and if
-      they are, we don't want to be confused by them.  */
-   id = DECL_NAME (fn);
--  return !!libc_name_p (IDENTIFIER_POINTER (id), IDENTIFIER_LENGTH (id));
-+  return !!libc_name::libc_name_p (IDENTIFIER_POINTER (id),
-+				   IDENTIFIER_LENGTH (id));
- }
- 
- /* Returns nonzero if an exception of type FROM will be caught by a
--- 
-1.7.1
diff --git a/package/gcc/4.8.5/130-pr43538.patch b/package/gcc/4.8.5/130-pr43538.patch
deleted file mode 100644
index 19e57bb..0000000
--- a/package/gcc/4.8.5/130-pr43538.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From c037df1be41f8daf4d581d7ffa4ec8cfa640bccf Mon Sep 17 00:00:00 2001
-From: glisse <glisse at 138bc75d-0d04-0410-961f-82ee72b054a4>
-Date: Fri, 25 Apr 2014 08:03:08 +0000
-Subject: [PATCH] 2014-04-25  Marc Glisse  <marc.glisse at inria.fr>
-
-	PR target/43538
-	* mt-gnu: Don't reset CXXFLAGS_FOR_TARGET.
-
-
-git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@209784 138bc75d-0d04-0410-961f-82ee72b054a4
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
- config/mt-gnu    | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/config/mt-gnu b/config/mt-gnu
-index 15bf417..5c696f5 100644
---- a/config/mt-gnu
-+++ b/config/mt-gnu
-@@ -1 +1 @@
--CXXFLAGS_FOR_TARGET = $(CXXFLAGS) -D_GNU_SOURCE
-+CXXFLAGS_FOR_TARGET += -D_GNU_SOURCE
--- 
-2.1.4
-
diff --git a/package/gcc/4.8.5/301-missing-execinfo_h.patch b/package/gcc/4.8.5/301-missing-execinfo_h.patch
deleted file mode 100644
index 00efda2..0000000
--- a/package/gcc/4.8.5/301-missing-execinfo_h.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: gcc-4.8.0/boehm-gc/include/gc.h
-===================================================================
---- gcc-4.8.0.orig/boehm-gc/include/gc.h	2007-04-23 23:10:09.000000000 +0200
-+++ gcc-4.8.0/boehm-gc/include/gc.h	2013-03-23 17:39:20.000000000 +0100
-@@ -503,7 +503,7 @@
- #if defined(__linux__) || defined(__GLIBC__)
- # include <features.h>
- # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \
--     && !defined(__ia64__)
-+     && !defined(__ia64__) && !defined(__UCLIBC__)
- #   ifndef GC_HAVE_BUILTIN_BACKTRACE
- #     define GC_HAVE_BUILTIN_BACKTRACE
- #   endif
diff --git a/package/gcc/4.8.5/305-libmudflap-susv3-legacy.patch b/package/gcc/4.8.5/305-libmudflap-susv3-legacy.patch
deleted file mode 100644
index 35d5f50..0000000
--- a/package/gcc/4.8.5/305-libmudflap-susv3-legacy.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-Index: gcc-4.8.0/libmudflap/mf-hooks2.c
-===================================================================
---- gcc-4.8.0.orig/libmudflap/mf-hooks2.c	2013-02-03 18:48:05.000000000 +0100
-+++ gcc-4.8.0/libmudflap/mf-hooks2.c	2013-03-23 17:39:43.000000000 +0100
-@@ -424,7 +424,7 @@
- {
-   TRACE ("%s\n", __PRETTY_FUNCTION__);
-   MF_VALIDATE_EXTENT(s, n, __MF_CHECK_WRITE, "bzero region");
--  bzero (s, n);
-+  memset (s, 0, n);
- }
- 
- 
-@@ -434,7 +434,7 @@
-   TRACE ("%s\n", __PRETTY_FUNCTION__);
-   MF_VALIDATE_EXTENT(src, n, __MF_CHECK_READ, "bcopy src");
-   MF_VALIDATE_EXTENT(dest, n, __MF_CHECK_WRITE, "bcopy dest");
--  bcopy (src, dest, n);
-+  memmove (dest, src, n);
- }
- 
- 
-@@ -444,7 +444,7 @@
-   TRACE ("%s\n", __PRETTY_FUNCTION__);
-   MF_VALIDATE_EXTENT(s1, n, __MF_CHECK_READ, "bcmp 1st arg");
-   MF_VALIDATE_EXTENT(s2, n, __MF_CHECK_READ, "bcmp 2nd arg");
--  return bcmp (s1, s2, n);
-+  return n == 0 ? 0 : memcmp (s1, s2, n);
- }
- 
- 
-@@ -453,7 +453,7 @@
-   size_t n = strlen (s);
-   TRACE ("%s\n", __PRETTY_FUNCTION__);
-   MF_VALIDATE_EXTENT(s, CLAMPADD(n, 1), __MF_CHECK_READ, "index region");
--  return index (s, c);
-+  return strchr (s, c);
- }
- 
- 
-@@ -462,7 +462,7 @@
-   size_t n = strlen (s);
-   TRACE ("%s\n", __PRETTY_FUNCTION__);
-   MF_VALIDATE_EXTENT(s, CLAMPADD(n, 1), __MF_CHECK_READ, "rindex region");
--  return rindex (s, c);
-+  return strrchr (s, c);
- }
- 
- /* XXX:  stpcpy, memccpy */
diff --git a/package/gcc/4.8.5/810-arm-softfloat-libgcc.patch b/package/gcc/4.8.5/810-arm-softfloat-libgcc.patch
deleted file mode 100644
index c8cb377..0000000
--- a/package/gcc/4.8.5/810-arm-softfloat-libgcc.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-Index: gcc-4.8.0/gcc/config/arm/linux-elf.h
-===================================================================
---- gcc-4.8.0.orig/gcc/config/arm/linux-elf.h	2013-01-10 21:38:27.000000000 +0100
-+++ gcc-4.8.0/gcc/config/arm/linux-elf.h	2013-03-23 17:40:00.000000000 +0100
-@@ -55,7 +55,7 @@
-    %{shared:-lc} \
-    %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
- 
--#define LIBGCC_SPEC "%{mfloat-abi=soft*:-lfloat} -lgcc"
-+#define LIBGCC_SPEC "-lgcc"
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
- 
-Index: gcc-4.8.0/libgcc/config/arm/t-linux
-===================================================================
---- gcc-4.8.0.orig/libgcc/config/arm/t-linux	2012-03-22 16:14:46.000000000 +0100
-+++ gcc-4.8.0/libgcc/config/arm/t-linux	2013-03-23 17:40:54.000000000 +0100
-@@ -1,6 +1,11 @@
- LIB1ASMSRC = arm/lib1funcs.S
- LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx _clzsi2 _clzdi2 \
--	_ctzsi2 _arm_addsubdf3 _arm_addsubsf3
-+	_ctzsi2 _arm_addsubdf3 _arm_addsubsf3 \
-+	_arm_addsubdf3 _arm_addsubsf3 \
-+	_arm_negdf2 _arm_muldivdf3 _arm_cmpdf2 _arm_unorddf2 \
-+	_arm_fixdfsi _arm_fixunsdfsi _arm_truncdfsf2 \
-+	_arm_negsf2 _arm_muldivsf3 _arm_cmpsf2 _arm_unordsf2 \
-+	_arm_fixsfsi _arm_fixunssfsi
- 
- # Just for these, we omit the frame pointer since it makes such a big
- # difference.
diff --git a/package/gcc/4.8.5/830-arm_unbreak_armv4t.patch b/package/gcc/4.8.5/830-arm_unbreak_armv4t.patch
deleted file mode 100644
index 37f8f2a..0000000
--- a/package/gcc/4.8.5/830-arm_unbreak_armv4t.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-http://sourceware.org/ml/crossgcc/2008-05/msg00009.html
-
---- a/gcc/config/arm/linux-eabi.h
-+++ b/gcc/config/arm/linux-eabi.h
-@@ -45,7 +45,7 @@
-    The ARM10TDMI core is the default for armv5t, so set
-    SUBTARGET_CPU_DEFAULT to achieve this.  */
- #undef  SUBTARGET_CPU_DEFAULT
--#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm10tdmi
-+#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm9tdmi
- 
- /* TARGET_BIG_ENDIAN_DEFAULT is set in
-    config.gcc for big endian configurations.  */
diff --git a/package/gcc/4.8.5/841-PR57717-E500v2.patch b/package/gcc/4.8.5/841-PR57717-E500v2.patch
deleted file mode 100644
index a011e24..0000000
--- a/package/gcc/4.8.5/841-PR57717-E500v2.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-This backports fix from http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57717
-
-Upstream-Status: Backport
-Signed-off-by: Julian Brown <Julian_Brown at mentor.com>
-[Gustavo: Update for gcc 4.8.3]
-
-fix for PR57717 (PowerPC E500v2)
-http://gcc.gnu.org/ml/gcc-patches/2013-08/msg00668.html
-
-diff -Nura gcc-4.8.3/gcc/config/rs6000/rs6000.c gcc-4.8.3-pr57717/gcc/config/rs6000/rs6000.c
---- gcc-4.8.3/gcc/config/rs6000/rs6000.c	2014-05-04 23:18:35.000000000 -0300
-+++ gcc-4.8.3-pr57717/gcc/config/rs6000/rs6000.c	2014-05-22 15:20:12.554270919 -0300
-@@ -7343,9 +7343,7 @@
-       && GET_CODE (XEXP (x, 1)) == CONST_INT
-       && reg_offset_p
-       && !SPE_VECTOR_MODE (mode)
--      && !(TARGET_E500_DOUBLE && (mode == DFmode || mode == TFmode
--				  || mode == DDmode || mode == TDmode
--				  || mode == DImode))
-+      && !(TARGET_E500_DOUBLE && GET_MODE_SIZE (mode) > UNITS_PER_WORD)
-       && (!VECTOR_MODE_P (mode) || VECTOR_MEM_NONE_P (mode)))
-     {
-       HOST_WIDE_INT val = INTVAL (XEXP (x, 1));
diff --git a/package/gcc/4.8.5/842-PR60155.patch b/package/gcc/4.8.5/842-PR60155.patch
deleted file mode 100644
index 7bc2122..0000000
--- a/package/gcc/4.8.5/842-PR60155.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From gcc bugzilla https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60155
-Upstream status: in trunk.
-
-Signed-off-by: Gustavo Zacarias <gustavo at zacarias.com.ar>
-
---- trunk/gcc/gcse.c	2014/02/12 14:50:06	207726
-+++ trunk/gcc/gcse.c	2014/04/04 22:25:51	209134
-@@ -2502,6 +2502,65 @@
-       }
- }
- 
-+struct set_data
-+{
-+  rtx insn;
-+  const_rtx set;
-+  int nsets;
-+};
-+
-+/* Increment number of sets and record set in DATA.  */
-+
-+static void
-+record_set_data (rtx dest, const_rtx set, void *data)
-+{
-+  struct set_data *s = (struct set_data *)data;
-+
-+  if (GET_CODE (set) == SET)
-+    {
-+      /* We allow insns having multiple sets, where all but one are
-+	 dead as single set insns.  In the common case only a single
-+	 set is present, so we want to avoid checking for REG_UNUSED
-+	 notes unless necessary.  */
-+      if (s->nsets == 1
-+	  && find_reg_note (s->insn, REG_UNUSED, SET_DEST (s->set))
-+	  && !side_effects_p (s->set))
-+	s->nsets = 0;
-+
-+      if (!s->nsets)
-+	{
-+	  /* Record this set.  */
-+	  s->nsets += 1;
-+	  s->set = set;
-+	}
-+      else if (!find_reg_note (s->insn, REG_UNUSED, dest)
-+	       || side_effects_p (set))
-+	s->nsets += 1;
-+    }
-+}
-+
-+static const_rtx
-+single_set_gcse (rtx insn)
-+{
-+  struct set_data s;
-+  rtx pattern;
-+  
-+  gcc_assert (INSN_P (insn));
-+
-+  /* Optimize common case.  */
-+  pattern = PATTERN (insn);
-+  if (GET_CODE (pattern) == SET)
-+    return pattern;
-+
-+  s.insn = insn;
-+  s.nsets = 0;
-+  note_stores (pattern, record_set_data, &s);
-+
-+  /* Considered invariant insns have exactly one set.  */
-+  gcc_assert (s.nsets == 1);
-+  return s.set;
-+}
-+
- /* Emit move from SRC to DEST noting the equivalence with expression computed
-    in INSN.  */
- 
-@@ -2509,7 +2568,8 @@
- gcse_emit_move_after (rtx dest, rtx src, rtx insn)
- {
-   rtx new_rtx;
--  rtx set = single_set (insn), set2;
-+  const_rtx set = single_set_gcse (insn);
-+  rtx set2;
-   rtx note;
-   rtx eqv = NULL_RTX;
- 
-@@ -3369,13 +3429,12 @@
- 	      FOR_EACH_VEC_ELT (occrs_to_hoist, j, occr)
- 		{
- 		  rtx insn;
--		  rtx set;
-+		  const_rtx set;
- 
- 		  gcc_assert (!occr->deleted_p);
- 
- 		  insn = occr->insn;
--		  set = single_set (insn);
--		  gcc_assert (set);
-+		  set = single_set_gcse (insn);
- 
- 		  /* Create a pseudo-reg to store the result of reaching
- 		     expressions into.  Get the mode for the new pseudo
-@@ -3456,10 +3515,8 @@
- {
-   rtx reg;
-   enum reg_class pressure_class;
--  rtx set = single_set (insn);
-+  const_rtx set = single_set_gcse (insn);
- 
--  /* Considered invariant insns have only one set.  */
--  gcc_assert (set != NULL_RTX);
-   reg = SET_DEST (set);
-   if (GET_CODE (reg) == SUBREG)
-     reg = SUBREG_REG (reg);
diff --git a/package/gcc/4.8.5/843-aarch64-vmlaq_lane_s32-typo.patch b/package/gcc/4.8.5/843-aarch64-vmlaq_lane_s32-typo.patch
deleted file mode 100644
index afa650c..0000000
--- a/package/gcc/4.8.5/843-aarch64-vmlaq_lane_s32-typo.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 845478644ba54a6947e9b224f2e5cd342e8257a9 Mon Sep 17 00:00:00 2001
-From: Andrew Hsieh <andrewhsieh at google.com>
-Date: Wed, 25 Jun 2014 22:13:48 -0700
-Subject: [PATCH] Fix a typo in vmlaq_lane_s32
-
-BUG=15526898
-
-Change-Id: I4e35a764d369d378808dab29beefe34d1f93249b
-Signed-off-by: Peter Korsgaard <peter at korsgaard.com>
----
-
-diff --git a/gcc/config/aarch64/arm_neon.h b/gcc/config/aarch64/arm_neon.h
-index 73c7e7d..92b0119 100644
---- a/gcc/config/aarch64/arm_neon.h
-+++ b/gcc/config/aarch64/arm_neon.h
-@@ -9984,7 +9984,7 @@
- #define vmlaq_lane_s32(a, b, c, d)                                      \
-   __extension__                                                         \
-     ({                                                                  \
--       int32x4_t c_ = (c);                                              \
-+       int32x2_t c_ = (c);                                              \
-        int32x4_t b_ = (b);                                              \
-        int32x4_t a_ = (a);                                              \
-        int32x4_t result;                                                \
diff --git a/package/gcc/4.8.5/850-libstdcxx-uclibc-c99.patch b/package/gcc/4.8.5/850-libstdcxx-uclibc-c99.patch
deleted file mode 100644
index 792976f..0000000
--- a/package/gcc/4.8.5/850-libstdcxx-uclibc-c99.patch
+++ /dev/null
@@ -1,273 +0,0 @@
-Allow C99-depending features of libstdc++ with uClibc
-
-The libstdc++ code is fairly restrictive on how it checks for C99
-compatibility: it requires *complete* C99 support to enable certain
-features. For example, uClibc provides a good number of C99 features,
-but not C99 complex number support. For this reason, libstdc++
-completely disables many the standard C++ methods that can in fact
-work because uClibc provides the necessary functions.
-
-This patch is similar and highly inspired from
-https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, but implemented in
-a way that doesn't involve changing the configure.ac script, as
-autoreconfiguring gcc is complicated. It simply relies on the fact
-that uClibc defines the __UCLIBC__ definition.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
-
-Index: b/libstdc++-v3/config/locale/generic/c_locale.h
-===================================================================
---- a/libstdc++-v3/config/locale/generic/c_locale.h
-+++ b/libstdc++-v3/config/locale/generic/c_locale.h
-@@ -70,7 +70,7 @@
-     __builtin_va_list __args;
-     __builtin_va_start(__args, __fmt);
- 
--#ifdef _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-     const int __ret = __builtin_vsnprintf(__out, __size, __fmt, __args);
- #else
-     const int __ret = __builtin_vsprintf(__out, __fmt, __args);
-Index: b/libstdc++-v3/config/locale/gnu/c_locale.h
-===================================================================
---- a/libstdc++-v3/config/locale/gnu/c_locale.h
-+++ b/libstdc++-v3/config/locale/gnu/c_locale.h
-@@ -88,7 +88,7 @@
-     __builtin_va_list __args;
-     __builtin_va_start(__args, __fmt);
- 
--#ifdef _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-     const int __ret = __builtin_vsnprintf(__out, __size, __fmt, __args);
- #else
-     const int __ret = __builtin_vsprintf(__out, __fmt, __args);
-Index: b/libstdc++-v3/include/bits/basic_string.h
-===================================================================
---- a/libstdc++-v3/include/bits/basic_string.h
-+++ b/libstdc++-v3/include/bits/basic_string.h
-@@ -2809,7 +2809,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if ((__cplusplus >= 201103L) && defined(_GLIBCXX_USE_C99) \
-+#if ((__cplusplus >= 201103L) && (defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)) \
-      && !defined(_GLIBCXX_HAVE_BROKEN_VSWPRINTF))
- 
- #include <ext/string_conversions.h>
-Index: b/libstdc++-v3/include/bits/locale_facets.tcc
-===================================================================
---- a/libstdc++-v3/include/bits/locale_facets.tcc
-+++ b/libstdc++-v3/include/bits/locale_facets.tcc
-@@ -987,7 +987,7 @@
- 	char __fbuf[16];
- 	__num_base::_S_format_float(__io, __fbuf, __mod);
- 
--#ifdef _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 	// First try a buffer perhaps big enough (most probably sufficient
- 	// for non-ios_base::fixed outputs)
- 	int __cs_size = __max_digits * 3;
-Index: b/libstdc++-v3/include/bits/locale_facets_nonio.tcc
-===================================================================
---- a/libstdc++-v3/include/bits/locale_facets_nonio.tcc
-+++ b/libstdc++-v3/include/bits/locale_facets_nonio.tcc
-@@ -572,7 +572,7 @@
-     {
-       const locale __loc = __io.getloc();
-       const ctype<_CharT>& __ctype = use_facet<ctype<_CharT> >(__loc);
--#ifdef _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-       // First try a buffer perhaps big enough.
-       int __cs_size = 64;
-       char* __cs = static_cast<char*>(__builtin_alloca(__cs_size));
-Index: b/libstdc++-v3/include/c_compatibility/math.h
-===================================================================
---- a/libstdc++-v3/include/c_compatibility/math.h
-+++ b/libstdc++-v3/include/c_compatibility/math.h
-@@ -56,7 +56,7 @@
- using std::floor;
- using std::fmod;
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- using std::fpclassify;
- using std::isfinite;
- using std::isinf;
-Index: b/libstdc++-v3/include/c_compatibility/wchar.h
-===================================================================
---- a/libstdc++-v3/include/c_compatibility/wchar.h
-+++ b/libstdc++-v3/include/c_compatibility/wchar.h
-@@ -103,7 +103,7 @@
- using std::wmemset;
- using std::wcsftime;
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- using std::wcstold;
- using std::wcstoll;
- using std::wcstoull;
-Index: b/libstdc++-v3/include/c_global/cstdlib
-===================================================================
---- a/libstdc++-v3/include/c_global/cstdlib
-+++ b/libstdc++-v3/include/c_global/cstdlib
-@@ -182,7 +182,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef _Exit
- #undef llabs
-Index: b/libstdc++-v3/include/c_global/cwchar
-===================================================================
---- a/libstdc++-v3/include/c_global/cwchar
-+++ b/libstdc++-v3/include/c_global/cwchar
-@@ -232,7 +232,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef wcstold
- #undef wcstoll
-@@ -289,7 +289,7 @@
-   using std::vwscanf;
- #endif
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-   using std::wcstold;
-   using std::wcstoll;
-   using std::wcstoull;
-Index: b/libstdc++-v3/include/c_std/cstdio
-===================================================================
---- a/libstdc++-v3/include/c_std/cstdio
-+++ b/libstdc++-v3/include/c_std/cstdio
-@@ -139,7 +139,7 @@
-   using ::vsprintf;
- } // namespace std
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef snprintf
- #undef vfscanf
-Index: b/libstdc++-v3/include/c_std/cstdlib
-===================================================================
---- a/libstdc++-v3/include/c_std/cstdlib
-+++ b/libstdc++-v3/include/c_std/cstdlib
-@@ -180,7 +180,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef _Exit
- #undef llabs
-Index: b/libstdc++-v3/include/c_std/cwchar
-===================================================================
---- a/libstdc++-v3/include/c_std/cwchar
-+++ b/libstdc++-v3/include/c_std/cwchar
-@@ -228,7 +228,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef wcstold
- #undef wcstoll
-Index: b/libstdc++-v3/include/ext/vstring.h
-===================================================================
---- a/libstdc++-v3/include/ext/vstring.h
-+++ b/libstdc++-v3/include/ext/vstring.h
-@@ -2571,7 +2571,7 @@
- _GLIBCXX_END_NAMESPACE_VERSION
- } // namespace
- 
--#if ((__cplusplus >= 201103L) && defined(_GLIBCXX_USE_C99))
-+#if ((__cplusplus >= 201103L) && (defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)))
- 
- #include <ext/string_conversions.h>
- 
-Index: b/libstdc++-v3/include/tr1/cstdio
-===================================================================
---- a/libstdc++-v3/include/tr1/cstdio
-+++ b/libstdc++-v3/include/tr1/cstdio
-@@ -33,7 +33,7 @@
- 
- #include <cstdio>
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- namespace std _GLIBCXX_VISIBILITY(default)
- {
-Index: b/libstdc++-v3/include/tr1/cstdlib
-===================================================================
---- a/libstdc++-v3/include/tr1/cstdlib
-+++ b/libstdc++-v3/include/tr1/cstdlib
-@@ -35,7 +35,7 @@
- 
- #if _GLIBCXX_HOSTED
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- namespace std _GLIBCXX_VISIBILITY(default)
- {
-Index: b/libstdc++-v3/include/tr1/cwchar
-===================================================================
---- a/libstdc++-v3/include/tr1/cwchar
-+++ b/libstdc++-v3/include/tr1/cwchar
-@@ -52,7 +52,7 @@
-   using std::vwscanf;
- #endif
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-   using std::wcstold;
-   using std::wcstoll;
-   using std::wcstoull;
-Index: b/libstdc++-v3/include/tr1/stdlib.h
-===================================================================
---- a/libstdc++-v3/include/tr1/stdlib.h
-+++ b/libstdc++-v3/include/tr1/stdlib.h
-@@ -33,7 +33,7 @@
- 
- #if _GLIBCXX_HOSTED
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- using std::tr1::atoll;
- using std::tr1::strtoll;
-Index: b/libstdc++-v3/src/c++11/debug.cc
-===================================================================
---- a/libstdc++-v3/src/c++11/debug.cc
-+++ b/libstdc++-v3/src/c++11/debug.cc
-@@ -787,7 +787,7 @@
- 				     int __n __attribute__ ((__unused__)), 
- 				     const char* __fmt, _Tp __s) const throw ()
-     {
--#ifdef _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
-       std::snprintf(__buf, __n, __fmt, __s);
- #else
-       std::sprintf(__buf, __fmt, __s);
-Index: b/libstdc++-v3/include/c_global/cstdio
-===================================================================
---- a/libstdc++-v3/include/c_global/cstdio
-+++ b/libstdc++-v3/include/c_global/cstdio
-@@ -139,7 +139,7 @@
-   using ::vsprintf;
- } // namespace
- 
--#if _GLIBCXX_USE_C99
-+#if defined(_GLIBCXX_USE_C99) || defined(__UCLIBC__)
- 
- #undef snprintf
- #undef vfscanf
diff --git a/package/gcc/4.8.5/851-PR-other-56780.patch b/package/gcc/4.8.5/851-PR-other-56780.patch
deleted file mode 100644
index feb4339..0000000
--- a/package/gcc/4.8.5/851-PR-other-56780.patch
+++ /dev/null
@@ -1,244 +0,0 @@
-From afe990251bd9b3a063f03da31a3b8d139d033bc3 Mon Sep 17 00:00:00 2001
-From: ian <ian at 138bc75d-0d04-0410-961f-82ee72b054a4>
-Date: Sat, 1 Jun 2013 00:20:49 +0000
-Subject: [PATCH] PR other/56780
-
-* libiberty/configure.ac: Move test for --enable-install-libiberty
-outside of the 'with_target_subdir' test so that it actually gets
-run.  Add output messages to show the test result.
-* libiberty/configure: Regenerate.
-* libiberty/Makefile.in (install_to_libdir): Place the
-installation of the libiberty library in the same guard as that
-used for the headers to prevent it being installed unless
-requested via --enable-install-libiberty.
-
-git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@199570 138bc75d-0d04-0410-961f-82ee72b054a4
-
-libiberty: fix --enable-install-libiberty flag [PR 56780]
-
-Commit 199570 fixed the --disable-install-libiberty behavior, but it also
-added a bug where the enable path never works because the initial clear
-of target_header_dir wasn't deleted.  So we end up initializing properly
-at the top only to reset it at the end all the time.
-
-git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206367 138bc75d-0d04-0410-961f-82ee72b054a4
-
-[Romain
-  squash the two upstream commits
-  Remove the ChangeLog]
-Signed-off-by: Romain Naour <romain.naour at openwide.fr>
----
- libiberty/Makefile.in  | 24 ++++++++++-----------
- libiberty/configure    | 57 +++++++++++++++++++++++++++-----------------------
- libiberty/configure.ac | 47 ++++++++++++++++++++++-------------------
- 3 files changed, 68 insertions(+), 60 deletions(-)
-
-diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in
-index f6a3ebd..75ff82d 100644
---- a/libiberty/Makefile.in
-+++ b/libiberty/Makefile.in
-@@ -355,19 +355,19 @@ install-strip: install
- # since it will be passed the multilib flags.
- MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory`
- install_to_libdir: all
--	${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR)
--	$(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n
--	( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n )
--	mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)
- 	if test -n "${target_header_dir}"; then \
--	  case "${target_header_dir}" in \
--	    /*)    thd=${target_header_dir};; \
--	    *)     thd=${includedir}/${target_header_dir};; \
--	  esac; \
--	  ${mkinstalldirs} $(DESTDIR)$${thd}; \
--	  for h in ${INSTALLED_HEADERS}; do \
--	    ${INSTALL_DATA} $$h $(DESTDIR)$${thd}; \
--	  done; \
-+		${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR); \
-+		$(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n; \
-+		( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n ); \
-+		mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB); \
-+		case "${target_header_dir}" in \
-+		  /*)    thd=${target_header_dir};; \
-+		  *)     thd=${includedir}/${target_header_dir};; \
-+		esac; \
-+		${mkinstalldirs} $(DESTDIR)$${thd}; \
-+		for h in ${INSTALLED_HEADERS}; do \
-+		  ${INSTALL_DATA} $$h $(DESTDIR)$${thd}; \
-+		done; \
- 	fi
- 	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
- 
-diff --git a/libiberty/configure b/libiberty/configure
-index 5367027..4feb95a 100755
---- a/libiberty/configure
-+++ b/libiberty/configure
-@@ -675,8 +675,8 @@ with_cross_host
- with_newlib
- enable_maintainer_mode
- enable_multilib
--enable_largefile
- enable_install_libiberty
-+enable_largefile
- '
-       ac_precious_vars='build_alias
- host_alias
-@@ -1303,8 +1303,8 @@ Optional Features:
-                           enable make rules and dependencies not useful
-                           (and sometimes confusing) to the casual installer
-   --enable-multilib       build many library versions (default)
-+  --enable-install-libiberty       Install headers and library for end users
-   --disable-largefile     omit support for large files
--  --enable-install-libiberty       Install headers for end users
- 
- Optional Packages:
-   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-@@ -2784,6 +2784,35 @@ if test $cross_compiling = no && test $multilib = yes \
-    cross_compiling=maybe
- fi
- 
-+# We may wish to install the target headers somewhere.
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to install libiberty headers and static library" >&5
-+$as_echo_n "checking whether to install libiberty headers and static library... " >&6; }
-+
-+# Check whether --enable-install-libiberty was given.
-+if test "${enable_install_libiberty+set}" = set; then :
-+  enableval=$enable_install_libiberty; enable_install_libiberty=$enableval
-+else
-+  enable_install_libiberty=no
-+fi
-+
-+# Option parsed, now set things appropriately.
-+case x"$enable_install_libiberty" in
-+  xyes|x)
-+    target_header_dir=libiberty
-+    ;;
-+  xno)
-+    target_header_dir=
-+    ;;
-+  *)
-+    # This could be sanity-checked in various ways...
-+    target_header_dir="${enable_install_libiberty}"
-+    ;;
-+esac
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_install_libiberty" >&5
-+$as_echo "$enable_install_libiberty" >&6; }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: target_header_dir = $target_header_dir" >&5
-+$as_echo "$as_me: target_header_dir = $target_header_dir" >&6;}
-+
- 
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
-@@ -5476,7 +5505,6 @@ fi
- 
- setobjs=
- CHECK=
--target_header_dir=
- if test -n "${with_target_subdir}"; then
- 
-   # We are being configured as a target library.  AC_REPLACE_FUNCS
-@@ -5759,29 +5787,6 @@ _ACEOF
- 
-   esac
- 
--  # We may wish to install the target headers somewhere.
--  # Check whether --enable-install-libiberty was given.
--if test "${enable_install_libiberty+set}" = set; then :
--  enableval=$enable_install_libiberty; enable_install_libiberty=$enableval
--else
--  enable_install_libiberty=no
--fi
--
--  # Option parsed, now set things appropriately.
--  case x"$enable_install_libiberty" in
--    xyes|x)
--      target_header_dir=libiberty
--      ;;
--    xno)
--      target_header_dir=
--      ;;
--    *)
--      # This could be sanity-checked in various ways...
--      target_header_dir="${enable_install_libiberty}"
--      ;;
--  esac
--
--
- else
- 
-    # Not a target library, so we set things up to run the test suite.
-diff --git a/libiberty/configure.ac b/libiberty/configure.ac
-index c763894..f17e6b6 100644
---- a/libiberty/configure.ac
-+++ b/libiberty/configure.ac
-@@ -128,6 +128,31 @@ if test $cross_compiling = no && test $multilib = yes \
-    cross_compiling=maybe
- fi
- 
-+# We may wish to install the target headers somewhere.
-+AC_MSG_CHECKING([whether to install libiberty headers and static library])
-+dnl install-libiberty is disabled by default
-+
-+AC_ARG_ENABLE(install-libiberty,
-+[  --enable-install-libiberty       Install headers and library for end users],
-+enable_install_libiberty=$enableval,
-+enable_install_libiberty=no)dnl
-+
-+# Option parsed, now set things appropriately.
-+case x"$enable_install_libiberty" in
-+  xyes|x)
-+    target_header_dir=libiberty
-+    ;;
-+  xno)   
-+    target_header_dir=
-+    ;;
-+  *) 
-+    # This could be sanity-checked in various ways...
-+    target_header_dir="${enable_install_libiberty}"
-+    ;;
-+esac
-+AC_MSG_RESULT($enable_install_libiberty)
-+AC_MSG_NOTICE([target_header_dir = $target_header_dir])
-+
- GCC_NO_EXECUTABLES
- AC_PROG_CC
- AC_SYS_LARGEFILE
-@@ -380,7 +405,6 @@ fi
- 
- setobjs=
- CHECK=
--target_header_dir=
- if test -n "${with_target_subdir}"; then
- 
-   # We are being configured as a target library.  AC_REPLACE_FUNCS
-@@ -492,27 +516,6 @@ if test -n "${with_target_subdir}"; then
- 
-   esac
- 
--  # We may wish to install the target headers somewhere.
--  AC_ARG_ENABLE(install-libiberty,
--  [  --enable-install-libiberty       Install headers for end users],
--  enable_install_libiberty=$enableval,
--  enable_install_libiberty=no)dnl
--  
--  # Option parsed, now set things appropriately.
--  case x"$enable_install_libiberty" in
--    xyes|x)
--      target_header_dir=libiberty
--      ;;
--    xno)   
--      target_header_dir=
--      ;;
--    *) 
--      # This could be sanity-checked in various ways...
--      target_header_dir="${enable_install_libiberty}"
--      ;;
--  esac
--
--
- else
- 
-    # Not a target library, so we set things up to run the test suite.
--- 
-1.9.3
-
diff --git a/package/gcc/4.8.5/870-xtensa-add-mauto-litpools-option.patch b/package/gcc/4.8.5/870-xtensa-add-mauto-litpools-option.patch
deleted file mode 100644
index aa1376c..0000000
--- a/package/gcc/4.8.5/870-xtensa-add-mauto-litpools-option.patch
+++ /dev/null
@@ -1,290 +0,0 @@
-From 6d852ffb43b111a39162135c95249e749c4e285b Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Thu, 6 Aug 2015 01:16:02 +0300
-Subject: [PATCH] xtensa: add -mauto-litpools option
-
-With support from assembler this option allows compiling huge functions,
-where single literal pool at the beginning of a function may not be
-reachable by L32R instructions at its end.
-
-Currently assembler --auto-litpools option cannot deal with literals
-used from multiple locations separated by more than 256 KBytes of code.
-Don't turn constants into literals, instead use MOVI instruction to load
-them into registers and let the assembler turn them into literals as
-necessary.
-
-2015-08-12  Max Filippov  <jcmvbkbc at gmail.com>
-gcc/
-	* config/xtensa/constraints.md (define_constraint "Y"): New
-	constraint.
-	* config/xtensa/elf.h (ASM_SPEC): Add m(no-)auto-litpools.
-	* config/xtensa/linux.h (ASM_SPEC): Likewise.
-	* config/xtensa/predicates.md (move_operand): Match constants
-	and symbols in the presence of TARGET_AUTO_LITPOOLS.
-	* config/xtensa/xtensa.c (xtensa_valid_move): Don't allow
-	immediate references to TLS data.
-	(xtensa_emit_move_sequence): Don't force constants to memory in
-	the presence of TARGET_AUTO_LITPOOLS.
-	(print_operand): Add 'y' format, same as default, but capable of
-	printing SF mode constants as well.
-	* config/xtensa/xtensa.md (movsi_internal, movhi_internal)
-	(movsf_internal): Add movi pattern that loads literal.
-	(movsf, movdf): Don't force constants to memory in the presence
-	of TARGET_AUTO_LITPOOLS.
-	(movdf_internal): Add 'Y' constraint.
-	* config/xtensa/xtensa.opt (mauto-litpools): New option.
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: r226828
-Changes to ChangeLogs and documentation are dropped.
-
- gcc/config/xtensa/constraints.md |  5 +++++
- gcc/config/xtensa/elf.h          |  4 +++-
- gcc/config/xtensa/linux.h        |  4 +++-
- gcc/config/xtensa/predicates.md  |  3 ++-
- gcc/config/xtensa/xtensa.c       | 19 ++++++++++++++++++-
- gcc/config/xtensa/xtensa.md      | 35 +++++++++++++++++++----------------
- gcc/config/xtensa/xtensa.opt     |  4 ++++
- 7 files changed, 54 insertions(+), 20 deletions(-)
-
-diff --git a/gcc/config/xtensa/constraints.md b/gcc/config/xtensa/constraints.md
-index 30f4c1f..773d4f9 100644
---- a/gcc/config/xtensa/constraints.md
-+++ b/gcc/config/xtensa/constraints.md
-@@ -111,6 +111,11 @@
-  (and (match_code "const_int")
-       (match_test "xtensa_mask_immediate (ival)")))
- 
-+(define_constraint "Y"
-+ "A constant that can be used in relaxed MOVI instructions."
-+ (and (match_code "const_int,const_double,const,symbol_ref,label_ref")
-+      (match_test "TARGET_AUTO_LITPOOLS")))
-+
- ;; Memory constraints.  Do not use define_memory_constraint here.  Doing so
- ;; causes reload to force some constants into the constant pool, but since
- ;; the Xtensa constant pool can only be accessed with L32R instructions, it
-diff --git a/gcc/config/xtensa/elf.h b/gcc/config/xtensa/elf.h
-index e59bede..12056f7 100644
---- a/gcc/config/xtensa/elf.h
-+++ b/gcc/config/xtensa/elf.h
-@@ -48,7 +48,9 @@ along with GCC; see the file COPYING3.  If not see
-   %{mtarget-align:--target-align} \
-   %{mno-target-align:--no-target-align} \
-   %{mlongcalls:--longcalls} \
--  %{mno-longcalls:--no-longcalls}"
-+  %{mno-longcalls:--no-longcalls} \
-+  %{mauto-litpools:--auto-litpools} \
-+  %{mno-auto-litpools:--no-auto-litpools}"
- 
- #undef LIB_SPEC
- #define LIB_SPEC "-lc -lsim -lc -lhandlers-sim -lhal"
-diff --git a/gcc/config/xtensa/linux.h b/gcc/config/xtensa/linux.h
-index 675aacf..5b0243a 100644
---- a/gcc/config/xtensa/linux.h
-+++ b/gcc/config/xtensa/linux.h
-@@ -42,7 +42,9 @@ along with GCC; see the file COPYING3.  If not see
-   %{mtarget-align:--target-align} \
-   %{mno-target-align:--no-target-align} \
-   %{mlongcalls:--longcalls} \
--  %{mno-longcalls:--no-longcalls}"
-+  %{mno-longcalls:--no-longcalls} \
-+  %{mauto-litpools:--auto-litpools} \
-+  %{mno-auto-litpools:--no-auto-litpools}"
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
- 
-diff --git a/gcc/config/xtensa/predicates.md b/gcc/config/xtensa/predicates.md
-index e02209e..d7dfa11 100644
---- a/gcc/config/xtensa/predicates.md
-+++ b/gcc/config/xtensa/predicates.md
-@@ -142,7 +142,8 @@
- 	       (match_test "GET_MODE_CLASS (mode) == MODE_INT
- 			    && xtensa_simm12b (INTVAL (op))"))
- 	  (and (match_code "const_int,const_double,const,symbol_ref,label_ref")
--	       (match_test "TARGET_CONST16 && CONSTANT_P (op)
-+	       (match_test "(TARGET_CONST16 || TARGET_AUTO_LITPOOLS)
-+			    && CONSTANT_P (op)
- 			    && GET_MODE_SIZE (mode) % UNITS_PER_WORD == 0")))))
- 
- ;; Accept the floating point constant 1 in the appropriate mode.
-diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
-index eb039ba..206ff80 100644
---- a/gcc/config/xtensa/xtensa.c
-+++ b/gcc/config/xtensa/xtensa.c
-@@ -501,6 +501,9 @@ xtensa_valid_move (machine_mode mode, rtx *operands)
-     {
-       int dst_regnum = xt_true_regnum (operands[0]);
- 
-+      if (xtensa_tls_referenced_p (operands[1]))
-+	return FALSE;
-+
-       /* The stack pointer can only be assigned with a MOVSP opcode.  */
-       if (dst_regnum == STACK_POINTER_REGNUM)
- 	return !TARGET_WINDOWED_ABI
-@@ -1069,7 +1072,7 @@ xtensa_emit_move_sequence (rtx *operands, machine_mode mode)
- 	  return 1;
- 	}
- 
--      if (! TARGET_CONST16)
-+      if (! TARGET_AUTO_LITPOOLS && ! TARGET_CONST16)
- 	{
- 	  src = force_const_mem (SImode, src);
- 	  operands[1] = src;
-@@ -2449,6 +2452,20 @@ print_operand (FILE *file, rtx x, int letter)
- 	}
-       break;
- 
-+    case 'y':
-+      if (GET_CODE (x) == CONST_DOUBLE &&
-+	  GET_MODE (x) == SFmode)
-+	{
-+	  REAL_VALUE_TYPE r;
-+	  long l;
-+	  REAL_VALUE_FROM_CONST_DOUBLE (r, x);
-+	  REAL_VALUE_TO_TARGET_SINGLE (r, l);
-+	  fprintf (file, "0x%08lx", l);
-+	  break;
-+	}
-+
-+      /* fall through */
-+
-     default:
-       if (GET_CODE (x) == REG || GET_CODE (x) == SUBREG)
- 	fprintf (file, "%s", reg_names[xt_true_regnum (x)]);
-diff --git a/gcc/config/xtensa/xtensa.md b/gcc/config/xtensa/xtensa.md
-index 6d84384..0e673a3 100644
---- a/gcc/config/xtensa/xtensa.md
-+++ b/gcc/config/xtensa/xtensa.md
-@@ -761,8 +761,8 @@
- })
- 
- (define_insn "movsi_internal"
--  [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,W,a,a,U,*a,*A")
--	(match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,i,T,U,r,*A,*r"))]
-+  [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,a,W,a,a,U,*a,*A")
-+	(match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,Y,i,T,U,r,*A,*r"))]
-   "xtensa_valid_move (SImode, operands)"
-   "@
-    movi.n\t%0, %x1
-@@ -774,15 +774,16 @@
-    mov\t%0, %1
-    movsp\t%0, %1
-    movi\t%0, %x1
-+   movi\t%0, %1
-    const16\t%0, %t1\;const16\t%0, %b1
-    %v1l32r\t%0, %1
-    %v1l32i\t%0, %1
-    %v0s32i\t%1, %0
-    rsr\t%0, ACCLO
-    wsr\t%1, ACCLO"
--  [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,load,load,store,rsr,wsr")
-+  [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,move,load,load,store,rsr,wsr")
-    (set_attr "mode"	"SI")
--   (set_attr "length"	"2,2,2,2,2,2,3,3,3,6,3,3,3,3,3")])
-+   (set_attr "length"	"2,2,2,2,2,2,3,3,3,3,6,3,3,3,3,3")])
- 
- ;; 16-bit Integer moves
- 
-@@ -796,21 +797,22 @@
- })
- 
- (define_insn "movhi_internal"
--  [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,U,*a,*A")
--	(match_operand:HI 1 "move_operand" "M,d,r,I,U,r,*A,*r"))]
-+  [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,a,U,*a,*A")
-+	(match_operand:HI 1 "move_operand" "M,d,r,I,Y,U,r,*A,*r"))]
-   "xtensa_valid_move (HImode, operands)"
-   "@
-    movi.n\t%0, %x1
-    mov.n\t%0, %1
-    mov\t%0, %1
-    movi\t%0, %x1
-+   movi\t%0, %1
-    %v1l16ui\t%0, %1
-    %v0s16i\t%1, %0
-    rsr\t%0, ACCLO
-    wsr\t%1, ACCLO"
--  [(set_attr "type"	"move,move,move,move,load,store,rsr,wsr")
-+  [(set_attr "type"	"move,move,move,move,move,load,store,rsr,wsr")
-    (set_attr "mode"	"HI")
--   (set_attr "length"	"2,2,3,3,3,3,3,3")])
-+   (set_attr "length"	"2,2,3,3,3,3,3,3,3")])
- 
- ;; 8-bit Integer moves
- 
-@@ -881,7 +883,7 @@
- 	(match_operand:SF 1 "general_operand" ""))]
-   ""
- {
--  if (!TARGET_CONST16 && CONSTANT_P (operands[1]))
-+  if (!TARGET_CONST16 && !TARGET_AUTO_LITPOOLS && CONSTANT_P (operands[1]))
-     operands[1] = force_const_mem (SFmode, operands[1]);
- 
-   if ((!register_operand (operands[0], SFmode)
-@@ -896,8 +898,8 @@
- })
- 
- (define_insn "movsf_internal"
--  [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,W,a,a,U")
--	(match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,iF,T,U,r"))]
-+  [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,a,W,a,a,U")
-+	(match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,Y,iF,T,U,r"))]
-   "((register_operand (operands[0], SFmode)
-      || register_operand (operands[1], SFmode))
-     && !(FP_REG_P (xt_true_regnum (operands[0]))
-@@ -912,13 +914,14 @@
-    mov\t%0, %1
-    wfr\t%0, %1
-    rfr\t%0, %1
-+   movi\t%0, %y1
-    const16\t%0, %t1\;const16\t%0, %b1
-    %v1l32r\t%0, %1
-    %v1l32i\t%0, %1
-    %v0s32i\t%1, %0"
--  [(set_attr "type"	"farith,fload,fstore,move,load,store,move,farith,farith,move,load,load,store")
-+  [(set_attr "type"	"farith,fload,fstore,move,load,store,move,farith,farith,move,move,load,load,store")
-    (set_attr "mode"	"SF")
--   (set_attr "length"	"3,3,3,2,2,2,3,3,3,6,3,3,3")])
-+   (set_attr "length"	"3,3,3,2,2,2,3,3,3,3,6,3,3,3")])
- 
- (define_insn "*lsiu"
-   [(set (match_operand:SF 0 "register_operand" "=f")
-@@ -991,7 +994,7 @@
- 	(match_operand:DF 1 "general_operand" ""))]
-   ""
- {
--  if (CONSTANT_P (operands[1]) && !TARGET_CONST16)
-+  if (CONSTANT_P (operands[1]) && !TARGET_CONST16 && !TARGET_AUTO_LITPOOLS)
-     operands[1] = force_const_mem (DFmode, operands[1]);
- 
-   if (!register_operand (operands[0], DFmode)
-@@ -1002,8 +1005,8 @@
- })
- 
- (define_insn_and_split "movdf_internal"
--  [(set (match_operand:DF 0 "nonimmed_operand" "=a,W,a,a,U")
--	(match_operand:DF 1 "move_operand" "r,iF,T,U,r"))]
-+  [(set (match_operand:DF 0 "nonimmed_operand" "=a,a,W,a,a,U")
-+	(match_operand:DF 1 "move_operand" "r,Y,iF,T,U,r"))]
-   "register_operand (operands[0], DFmode)
-    || register_operand (operands[1], DFmode)"
-   "#"
-diff --git a/gcc/config/xtensa/xtensa.opt b/gcc/config/xtensa/xtensa.opt
-index 2fd6cee..21c6e96 100644
---- a/gcc/config/xtensa/xtensa.opt
-+++ b/gcc/config/xtensa/xtensa.opt
-@@ -38,6 +38,10 @@ mtext-section-literals
- Target
- Intersperse literal pools with code in the text section
- 
-+mauto-litpools
-+Target Report Mask(AUTO_LITPOOLS)
-+Relax literals in assembler and place them automatically in the text section
-+
- mserialize-volatile
- Target Report Mask(SERIALIZE_VOLATILE)
- -mno-serialize-volatile	Do not serialize volatile memory references with MEMW instructions
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/871-xtensa-reimplement-register-spilling.patch b/package/gcc/4.8.5/871-xtensa-reimplement-register-spilling.patch
deleted file mode 100644
index abc7a08..0000000
--- a/package/gcc/4.8.5/871-xtensa-reimplement-register-spilling.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 05154174b369505238b759cf80d595d8cfc8c731 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Mon, 10 Aug 2015 21:35:20 +0300
-Subject: [PATCH 1/3] xtensa: reimplement register spilling
-
-Spilling windowed registers in userspace is much easier, more portable,
-less error-prone and equally effective as in kernel. Now that register
-spilling syscall is considered obsolete in the xtensa linux kernel
-replace it with CALL12 followed by series of ENTRY in libgcc.
-
-2015-08-18  Max Filippov  <jcmvbkbc at gmail.com>
-libgcc/
-	* config/xtensa/lib2funcs.S (__xtensa_libgcc_window_spill): Use
-	CALL12 followed by series of ENTRY to spill windowed registers.
-	(__xtensa_nonlocal_goto): Call __xtensa_libgcc_window_spill
-	instead of making linux spill syscall.
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: r226962
-
- libgcc/config/xtensa/lib2funcs.S | 30 +++++++++++++++++++++++-------
- 1 file changed, 23 insertions(+), 7 deletions(-)
-
-diff --git a/libgcc/config/xtensa/lib2funcs.S b/libgcc/config/xtensa/lib2funcs.S
-index 3ac8c1d..2e678af 100644
---- a/libgcc/config/xtensa/lib2funcs.S
-+++ b/libgcc/config/xtensa/lib2funcs.S
-@@ -33,10 +33,29 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
- 	.global	__xtensa_libgcc_window_spill
- 	.type	__xtensa_libgcc_window_spill, at function
- __xtensa_libgcc_window_spill:
--	entry	sp, 32
--	movi	a2, 0
--	syscall
-+	entry	sp, 48
-+#if XCHAL_NUM_AREGS > 16
-+	call12	1f
-+	retw
-+	.align	4
-+1:
-+	.rept	(XCHAL_NUM_AREGS - 24) / 12
-+	_entry	sp, 48
-+	mov	a12, a0
-+	.endr
-+	_entry	sp, 16
-+#if XCHAL_NUM_AREGS % 12 == 0
-+	mov	a4, a4
-+#elif XCHAL_NUM_AREGS % 12 == 4
-+	mov	a8, a8
-+#elif XCHAL_NUM_AREGS % 12 == 8
-+	mov	a12, a12
-+#endif
-+	retw
-+#else
-+	mov	a8, a8
- 	retw
-+#endif
- 	.size	__xtensa_libgcc_window_spill, .-__xtensa_libgcc_window_spill
- 
- 
-@@ -58,10 +77,7 @@ __xtensa_nonlocal_goto:
- 	entry	sp, 32
- 
- 	/* Flush registers.  */
--	mov	a5, a2
--	movi	a2, 0
--	syscall
--	mov	a2, a5
-+	call8	__xtensa_libgcc_window_spill
- 
- 	/* Because the save area for a0-a3 is stored one frame below
- 	   the one identified by a2, the only way to restore those
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch b/package/gcc/4.8.5/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch
deleted file mode 100644
index f23a5c0..0000000
--- a/package/gcc/4.8.5/872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From f66206679a0ad604f13673559f230160cd3d1189 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Fri, 14 Aug 2015 02:45:02 +0300
-Subject: [PATCH 2/3] xtensa: use unwind-dw2-fde-dip instead of unwind-dw2-fde
-
-This allows having exception cleanup code in binaries that don't
-register their unwind tables.
-
-2015-08-18  Max Filippov  <jcmvbkbc at gmail.com>
-libgcc/
-	* config/xtensa/t-xtensa (LIB2ADDEH): Replace unwind-dw2-fde
-	with unwind-dw2-fde-dip.
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: r226963
-
- libgcc/config/xtensa/t-xtensa | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/libgcc/config/xtensa/t-xtensa b/libgcc/config/xtensa/t-xtensa
-index 27399e6..66d0eb3 100644
---- a/libgcc/config/xtensa/t-xtensa
-+++ b/libgcc/config/xtensa/t-xtensa
-@@ -13,4 +13,4 @@ LIB1ASMFUNCS = _mulsi3 _divsi3 _modsi3 _udivsi3 _umodsi3 \
- LIB2ADD = $(srcdir)/config/xtensa/lib2funcs.S
- 
- LIB2ADDEH = $(srcdir)/config/xtensa/unwind-dw2-xtensa.c \
--   $(srcdir)/unwind-dw2-fde.c $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
-+   $(srcdir)/unwind-dw2-fde-dip.c $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/873-xtensa-fix-_Unwind_GetCFA.patch b/package/gcc/4.8.5/873-xtensa-fix-_Unwind_GetCFA.patch
deleted file mode 100644
index dc40513..0000000
--- a/package/gcc/4.8.5/873-xtensa-fix-_Unwind_GetCFA.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 15c7c4d39b317f0d902ef28fd43eca5c3369f891 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Sat, 15 Aug 2015 05:12:11 +0300
-Subject: [PATCH 3/3] xtensa: fix _Unwind_GetCFA
-
-Returning context->cfa in _Unwind_GetCFA makes CFA point one stack frame
-higher than what was actually used by code at context->ra. This results
-in invalid CFA value in signal frames and premature unwinding completion
-in forced unwinding used by uClibc NPTL thread cancellation.
-Returning context->sp from _Unwind_GetCFA makes all CFA values valid and
-matching code that used them.
-
-2015-08-18  Max Filippov  <jcmvbkbc at gmail.com>
-libgcc/
-	* config/xtensa/unwind-dw2-xtensa.c (_Unwind_GetCFA): Return
-	context->sp instead of context->cfa.
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: r226964
-
- libgcc/config/xtensa/unwind-dw2-xtensa.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/libgcc/config/xtensa/unwind-dw2-xtensa.c b/libgcc/config/xtensa/unwind-dw2-xtensa.c
-index 35f7797..ef6b900 100644
---- a/libgcc/config/xtensa/unwind-dw2-xtensa.c
-+++ b/libgcc/config/xtensa/unwind-dw2-xtensa.c
-@@ -130,7 +130,7 @@ _Unwind_GetGR (struct _Unwind_Context *context, int index)
- _Unwind_Word
- _Unwind_GetCFA (struct _Unwind_Context *context)
- {
--  return (_Unwind_Ptr) context->cfa;
-+  return (_Unwind_Ptr) context->sp;
- }
- 
- /* Overwrite the saved value for register INDEX in CONTEXT with VAL.  */
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/874-xtensa-add-uclinux-support.patch b/package/gcc/4.8.5/874-xtensa-add-uclinux-support.patch
deleted file mode 100644
index 23db3d8..0000000
--- a/package/gcc/4.8.5/874-xtensa-add-uclinux-support.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 70c2cb98fb129b4766b5da0f945dc41fd568c77a Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc at gmail.com>
-Date: Sat, 22 Aug 2015 08:44:26 +0300
-Subject: [PATCH] xtensa: add uclinux support
-
-2015-10-03  Max Filippov  <jcmvbkbc at gmail.com>
-gcc/
-	* config.gcc (xtensa*-*-uclinux*): New configuration.
-	* config/xtensa/uclinux.h: New file.
-	* config/xtensa/uclinux.opt: New file.
-
-libgcc/
-	* config.host (xtensa*-*-uclinux*): New configuration.
-
-Signed-off-by: Max Filippov <jcmvbkbc at gmail.com>
----
-Backported from: r228450
-
- gcc/config.gcc                |  5 ++++
- gcc/config/xtensa/uclinux.h   | 69 +++++++++++++++++++++++++++++++++++++++++++
- gcc/config/xtensa/uclinux.opt | 32 ++++++++++++++++++++
- libgcc/config.host            |  5 ++++
- 4 files changed, 111 insertions(+)
- create mode 100644 gcc/config/xtensa/uclinux.h
- create mode 100644 gcc/config/xtensa/uclinux.opt
-
-diff --git a/gcc/config.gcc b/gcc/config.gcc
-index c52f5a8..56797bd 100644
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -2995,6 +2995,11 @@ xtensa*-*-linux*)
- 	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
- 	tmake_file="${tmake_file} xtensa/t-xtensa"
- 	;;
-+xtensa*-*-uclinux*)
-+	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h"
-+	tmake_file="${tmake_file} xtensa/t-xtensa"
-+	extra_options="${extra_options} xtensa/uclinux.opt"
-+	;;
- am33_2.0-*-linux*)
- 	tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
- 	gas=yes gnu_ld=yes
-diff --git a/gcc/config/xtensa/uclinux.h b/gcc/config/xtensa/uclinux.h
-new file mode 100644
-index 0000000..4606020
---- /dev/null
-+++ b/gcc/config/xtensa/uclinux.h
-@@ -0,0 +1,69 @@
-+/* Xtensa uClinux configuration.
-+   Derived from the configuration for GCC for Intel i386 running Linux.
-+   Copyright (C) 2001-2015 Free Software Foundation, Inc.
-+
-+This file is part of GCC.
-+
-+GCC is free software; you can redistribute it and/or modify it under
-+the terms of the GNU General Public License as published by the Free
-+Software Foundation; either version 3, or (at your option) any later
-+version.
-+
-+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-+WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GCC; see the file COPYING3.  If not see
-+<http://www.gnu.org/licenses/>.  */
-+
-+#undef TARGET_OS_CPP_BUILTINS
-+#define TARGET_OS_CPP_BUILTINS()				\
-+  do								\
-+    {								\
-+      GNU_USER_TARGET_OS_CPP_BUILTINS ();			\
-+      builtin_define ("__uClinux__");				\
-+    }								\
-+  while (0)
-+
-+#undef SUBTARGET_CPP_SPEC
-+#define SUBTARGET_CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}"
-+
-+#undef SIZE_TYPE
-+#define SIZE_TYPE "unsigned int"
-+
-+#undef PTRDIFF_TYPE
-+#define PTRDIFF_TYPE "int"
-+
-+#undef WCHAR_TYPE
-+#define WCHAR_TYPE "long int"
-+
-+#undef WCHAR_TYPE_SIZE
-+#define WCHAR_TYPE_SIZE 32
-+
-+#undef ASM_SPEC
-+#define ASM_SPEC \
-+ "%{mtext-section-literals:--text-section-literals} \
-+  %{mno-text-section-literals:--no-text-section-literals} \
-+  %{mtarget-align:--target-align} \
-+  %{mno-target-align:--no-target-align} \
-+  %{mlongcalls:--longcalls} \
-+  %{mno-longcalls:--no-longcalls} \
-+  %{mauto-litpools:--auto-litpools} \
-+  %{mno-auto-litpools:--no-auto-litpools}"
-+
-+#undef LINK_SPEC
-+#define LINK_SPEC "%{!no-elf2flt:%{!elf2flt*:-elf2flt}}"
-+
-+#undef LOCAL_LABEL_PREFIX
-+#define LOCAL_LABEL_PREFIX	"."
-+
-+/* Always enable "-fpic" for Xtensa Linux.  */
-+#define XTENSA_ALWAYS_PIC 1
-+
-+#undef TARGET_LIBC_HAS_FUNCTION
-+#define TARGET_LIBC_HAS_FUNCTION no_c99_libc_has_function
-+
-+#undef DBX_REGISTER_NUMBER
-+
-diff --git a/gcc/config/xtensa/uclinux.opt b/gcc/config/xtensa/uclinux.opt
-new file mode 100644
-index 0000000..95ef777
---- /dev/null
-+++ b/gcc/config/xtensa/uclinux.opt
-@@ -0,0 +1,32 @@
-+; Xtensa uClinux options.
-+
-+; Copyright (C) 2015 Free Software Foundation, Inc.
-+;
-+; This file is part of GCC.
-+;
-+; GCC is free software; you can redistribute it and/or modify it under
-+; the terms of the GNU General Public License as published by the Free
-+; Software Foundation; either version 3, or (at your option) any later
-+; version.
-+;
-+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-+; WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+; for more details.
-+;
-+; You should have received a copy of the GNU General Public License
-+; along with GCC; see the file COPYING3.  If not see
-+; <http://www.gnu.org/licenses/>.
-+
-+; See the GCC internals manual (options.texi) for a description of
-+; this file's format.
-+
-+; Please try to keep this file in ASCII collating order.
-+
-+elf2flt
-+Driver
-+
-+elf2flt=
-+Driver JoinedOrMissing
-+
-+; This comment is to ensure we retain the blank line above.
-diff --git a/libgcc/config.host b/libgcc/config.host
-index 2c64756..2ee92c1 100644
---- a/libgcc/config.host
-+++ b/libgcc/config.host
-@@ -1295,6 +1295,11 @@ xtensa*-*-linux*)
- 	tmake_file="$tmake_file xtensa/t-xtensa xtensa/t-linux t-slibgcc-libgcc"
- 	md_unwind_header=xtensa/linux-unwind.h
- 	;;
-+xtensa*-*-uclinux*)
-+	tmake_file="$tmake_file xtensa/t-xtensa xtensa/t-linux t-slibgcc-libgcc"
-+	md_unwind_header=xtensa/linux-unwind.h
-+	extra_parts="$extra_parts crtbeginS.o crtbeginT.o crtendS.o"
-+	;;
- am33_2.0-*-linux*)
- 	# Don't need crtbeginT.o from *-*-linux* default.
- 	extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
--- 
-1.8.1.4
-
diff --git a/package/gcc/4.8.5/890-fix-m68k-compile.patch b/package/gcc/4.8.5/890-fix-m68k-compile.patch
deleted file mode 100644
index 124e842..0000000
--- a/package/gcc/4.8.5/890-fix-m68k-compile.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-remove unused header, which breaks the toolchain building
-
-Signed-off-by: Waldemar Brodkorb <wbx at openadk.org>
-
-diff -Nur gcc-4.8.5.orig/libgcc/config/m68k/linux-atomic.c gcc-4.8.5/libgcc/config/m68k/linux-atomic.c
---- gcc-4.8.5.orig/libgcc/config/m68k/linux-atomic.c	2013-02-04 20:06:20.000000000 +0100
-+++ gcc-4.8.5/libgcc/config/m68k/linux-atomic.c	2016-03-19 00:18:12.000000000 +0100
-@@ -33,7 +33,6 @@
-    using the kernel helper defined below.  There is no support for
-    64-bit operations yet.  */
- 
--#include <asm/unistd.h>
- #include <stdbool.h>
- 
- #ifndef __NR_atomic_cmpxchg_32
diff --git a/package/gcc/4.8.5/891-fix-m68k-uclinux.patch b/package/gcc/4.8.5/891-fix-m68k-uclinux.patch
deleted file mode 100644
index 37c7ac4..0000000
--- a/package/gcc/4.8.5/891-fix-m68k-uclinux.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-avoids internal compiler error while compiling linux-atomic.c
-See here:
-https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53833
-
-Signed-off-by: Waldemar Brodkorb <wbx at openadk.org>
-
-diff -Nur gcc-4.8.5.orig/libgcc/config.host gcc-4.8.5/libgcc/config.host
---- gcc-4.8.5.orig/libgcc/config.host	2014-03-20 17:12:30.000000000 +0100
-+++ gcc-4.8.5/libgcc/config.host	2016-04-27 15:04:01.521171537 +0200
-@@ -689,7 +689,7 @@
- m68k*-*-openbsd*)
- 	;;
- m68k-*-uclinux*)	# Motorola m68k/ColdFire running uClinux with uClibc
--	tmake_file="$tmake_file m68k/t-floatlib m68k/t-linux"
-+	tmake_file="$tmake_file m68k/t-floatlib"
- 	md_unwind_header=m68k/linux-unwind.h
- 	;;
- m68k-*-linux*)			# Motorola m68k's running GNU/Linux
diff --git a/package/gcc/4.8.5/900-musl-support.patch b/package/gcc/4.8.5/900-musl-support.patch
deleted file mode 100644
index 6840fcc..0000000
--- a/package/gcc/4.8.5/900-musl-support.patch
+++ /dev/null
@@ -1,648 +0,0 @@
-Add musl support to gcc
-
-This patch comes from the musl-cross project at
-https://bitbucket.org/GregorR/musl-cross/src. Compared to the upstream version:
-
- * the config.sub modifications have been removed, because Buildroot
-   already overwrites all config.sub with a more recent config.sub
-   that has musl support.
-
- * change to ensure that a dummy dynamic linker path
-   MUSL_DYNAMIC_LINKER<foo> is defined for all architectures,
-   otherwise building gcc for architectures not supported by musl was
-   causing build failure. Bug reported upstream at
-   https://bitbucket.org/GregorR/musl-gcc-patches/issue/4/musl-gcc-patches-break-the-build-on.
-
- * change the USE_PT_GNU_EH_FRAME logic to keep the existing gcc logic
-   and only add the musl one as an addition, not as a replacement. Not
-   doing this breaks C++ exception handling with glibc, because
-   USE_PT_GNU_EH_FRAME doesn't get defined due to the configure script
-   not testing dl_iterate_phdr() on any system except Solaris.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
-[Gustavo: Update for gcc 4.8.3]
-
-Index: b/fixincludes/mkfixinc.sh
-===================================================================
---- a/fixincludes/mkfixinc.sh
-+++ b/fixincludes/mkfixinc.sh
-@@ -19,7 +19,8 @@
-     powerpc-*-eabi*    | \
-     powerpc-*-rtems*   | \
-     powerpcle-*-eabisim* | \
--    powerpcle-*-eabi* )
-+    powerpcle-*-eabi* | \
-+    *-musl* )
- 	#  IF there is no include fixing,
- 	#  THEN create a no-op fixer and exit
- 	(echo "#! /bin/sh" ; echo "exit 0" ) > ${target}
-Index: b/gcc/config/aarch64/aarch64-linux.h
-===================================================================
---- a/gcc/config/aarch64/aarch64-linux.h
-+++ b/gcc/config/aarch64/aarch64-linux.h
-@@ -21,7 +21,12 @@
- #ifndef GCC_AARCH64_LINUX_H
- #define GCC_AARCH64_LINUX_H
- 
-+/* The AArch64 port currently supports two dynamic linkers:
-+   - ld-linux-aarch64.so.1 - GLIBC dynamic linker
-+   - ld-musl-aarch64.so.1 - musl libc dynamic linker  */
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-aarch64.so.1"
-+#undef MUSL_DYNAMIC_LINKER
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-aarch64.so.1"
- 
- #define CPP_SPEC "%{pthread:-D_REENTRANT}"
- 
-Index: b/gcc/config/arm/linux-eabi.h
-===================================================================
---- a/gcc/config/arm/linux-eabi.h
-+++ b/gcc/config/arm/linux-eabi.h
-@@ -77,6 +77,23 @@
-     %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \
-     %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}"
- 
-+/* For ARM musl currently supports four dynamic linkers:
-+   - ld-musl-arm.so.1 - for the EABI-derived soft-float ABI
-+   - ld-musl-armhf.so.1 - for the EABI-derived hard-float ABI
-+   - ld-musl-armeb.so.1 - for the EABI-derived soft-float ABI, EB
-+   - ld-musl-armebhf.so.1 - for the EABI-derived hard-float ABI, EB
-+   musl does not support the legacy OABI mode.
-+   All the dynamic linkers live in /lib.
-+   We default to soft-float, EL. */
-+#undef  MUSL_DYNAMIC_LINKER
-+#if TARGET_BIG_ENDIAN_DEFAULT
-+#define MUSL_DYNAMIC_LINKER_E "%{mlittle-endian:;:eb}"
-+#else
-+#define MUSL_DYNAMIC_LINKER_E "%{mbig-endian:eb}"
-+#endif
-+#define MUSL_DYNAMIC_LINKER \
-+  "/lib/ld-musl-arm" MUSL_DYNAMIC_LINKER_E "%{mfloat-abi=hard:hf}.so.1"
-+
- /* At this point, bpabi.h will have clobbered LINK_SPEC.  We want to
-    use the GNU/Linux version, not the generic BPABI version.  */
- #undef  LINK_SPEC
-Index: b/gcc/config/i386/linux64.h
-===================================================================
---- a/gcc/config/i386/linux64.h
-+++ b/gcc/config/i386/linux64.h
-@@ -30,3 +30,10 @@
- #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
- #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
- #define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
-+
-+#undef MUSL_DYNAMIC_LINKER32
-+#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-i386.so.1"
-+#undef MUSL_DYNAMIC_LINKER64
-+#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-x86_64.so.1"
-+#undef MUSL_DYNAMIC_LINKERX32
-+#define MUSL_DYNAMIC_LINKERX32 "/lib/ld-musl-x32.so.1"
-Index: b/gcc/config/i386/linux.h
-===================================================================
---- a/gcc/config/i386/linux.h
-+++ b/gcc/config/i386/linux.h
-@@ -21,3 +21,5 @@
- 
- #define GNU_USER_LINK_EMULATION "elf_i386"
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
-+#undef MUSL_DYNAMIC_LINKER
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-i386.so.1"
-Index: b/gcc/config/linux.h
-===================================================================
---- a/gcc/config/linux.h
-+++ b/gcc/config/linux.h
-@@ -32,10 +32,12 @@
- #define OPTION_GLIBC  (DEFAULT_LIBC == LIBC_GLIBC)
- #define OPTION_UCLIBC (DEFAULT_LIBC == LIBC_UCLIBC)
- #define OPTION_BIONIC (DEFAULT_LIBC == LIBC_BIONIC)
-+#define OPTION_MUSL   (DEFAULT_LIBC == LIBC_MUSL)
- #else
- #define OPTION_GLIBC  (linux_libc == LIBC_GLIBC)
- #define OPTION_UCLIBC (linux_libc == LIBC_UCLIBC)
- #define OPTION_BIONIC (linux_libc == LIBC_BIONIC)
-+#define OPTION_MUSL   (linux_libc == LIBC_MUSL)
- #endif
- 
- #define GNU_USER_TARGET_OS_CPP_BUILTINS()			\
-@@ -53,18 +55,21 @@
-    uClibc or Bionic is the default C library and whether
-    -muclibc or -mglibc or -mbionic has been passed to change the default.  */
- 
--#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LD1, LD2, LD3)	\
--  "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:" LD1 "}}"
-+#define CHOOSE_DYNAMIC_LINKER1(LIBC1, LIBC2, LIBC3, LIBC4, LD1, LD2, LD3, LD4)	\
-+  "%{" LIBC2 ":" LD2 ";:%{" LIBC3 ":" LD3 ";:%{" LIBC4 ":" LD4 ";:" LD1 "}}}"
- 
- #if DEFAULT_LIBC == LIBC_GLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
--  CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", G, U, B)
-+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
-+  CHOOSE_DYNAMIC_LINKER1 ("mglibc", "muclibc", "mbionic", "mmusl", G, U, B, M)
- #elif DEFAULT_LIBC == LIBC_UCLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
--  CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", U, G, B)
-+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
-+  CHOOSE_DYNAMIC_LINKER1 ("muclibc", "mglibc", "mbionic", "mmusl", U, G, B, M)
- #elif DEFAULT_LIBC == LIBC_BIONIC
--#define CHOOSE_DYNAMIC_LINKER(G, U, B) \
--  CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", B, G, U)
-+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
-+  CHOOSE_DYNAMIC_LINKER1 ("mbionic", "mglibc", "muclibc", "mmusl", B, G, U, M)
-+#elif DEFAULT_LIBC == LIBC_MUSL
-+#define CHOOSE_DYNAMIC_LINKER(G, U, B, M) \
-+  CHOOSE_DYNAMIC_LINKER1 ("mmusl", "mglibc", "muclibc", "mbionic", M, G, U, B)
- #else
- #error "Unsupported DEFAULT_LIBC"
- #endif /* DEFAULT_LIBC */
-@@ -82,23 +87,32 @@
- #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
- #define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32"
- 
-+/* Musl dynamic linker paths must be defined on a per-architecture
-+   basis, for each architecture supported by Musl. However, in order
-+   to let other architectures continue to build with other C
-+   libraries, we provide a dummy definition of the following defines. */
-+#define MUSL_DYNAMIC_LINKER "invalid"
-+#define MUSL_DYNAMIC_LINKER32 "invalid"
-+#define MUSL_DYNAMIC_LINKER64 "invalid"
-+#define MUSL_DYNAMIC_LINKERX32 "invalid"
-+
- #define GNU_USER_DYNAMIC_LINKER						\
-   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER,	\
--			 BIONIC_DYNAMIC_LINKER)
-+			 BIONIC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
- #define GNU_USER_DYNAMIC_LINKER32					\
-   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, \
--			 BIONIC_DYNAMIC_LINKER32)
-+			 BIONIC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
- #define GNU_USER_DYNAMIC_LINKER64					\
-   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \
--			 BIONIC_DYNAMIC_LINKER64)
-+			 BIONIC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
- #define GNU_USER_DYNAMIC_LINKERX32					\
-   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \
--			 BIONIC_DYNAMIC_LINKERX32)
-+			 BIONIC_DYNAMIC_LINKERX32, MUSL_DYNAMIC_LINKERX32)
- 
- /* Determine whether the entire c99 runtime
-    is present in the runtime library.  */
- #undef TARGET_C99_FUNCTIONS
--#define TARGET_C99_FUNCTIONS (OPTION_GLIBC)
-+#define TARGET_C99_FUNCTIONS (OPTION_GLIBC || OPTION_MUSL)
- 
- /* Whether we have sincos that follows the GNU extension.  */
- #undef TARGET_HAS_SINCOS
-@@ -107,3 +121,74 @@
- /* Whether we have Bionic libc runtime */
- #undef TARGET_HAS_BIONIC
- #define TARGET_HAS_BIONIC (OPTION_BIONIC)
-+
-+/* musl avoids problematic includes by rearranging the include directories.
-+ * Unfortunately, this is mostly duplicated from cppdefault.c */
-+#if DEFAULT_LIBC == LIBC_MUSL
-+#define INCLUDE_DEFAULTS_MUSL_GPP			\
-+    { GPLUSPLUS_INCLUDE_DIR, "G++", 1, 1,		\
-+      GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },		\
-+    { GPLUSPLUS_TOOL_INCLUDE_DIR, "G++", 1, 1,		\
-+      GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 1 },		\
-+    { GPLUSPLUS_BACKWARD_INCLUDE_DIR, "G++", 1, 1,	\
-+      GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT, 0 },
-+
-+#ifdef LOCAL_INCLUDE_DIR
-+#define INCLUDE_DEFAULTS_MUSL_LOCAL			\
-+    { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 2 },		\
-+    { LOCAL_INCLUDE_DIR, 0, 0, 1, 1, 0 },
-+#else
-+#define INCLUDE_DEFAULTS_MUSL_LOCAL
-+#endif
-+
-+#ifdef PREFIX_INCLUDE_DIR
-+#define INCLUDE_DEFAULTS_MUSL_PREFIX			\
-+    { PREFIX_INCLUDE_DIR, 0, 0, 1, 0, 0},
-+#else
-+#define INCLUDE_DEFAULTS_MUSL_PREFIX
-+#endif
-+
-+#ifdef CROSS_INCLUDE_DIR
-+#define INCLUDE_DEFAULTS_MUSL_CROSS			\
-+    { CROSS_INCLUDE_DIR, "GCC", 0, 0, 0, 0},
-+#else
-+#define INCLUDE_DEFAULTS_MUSL_CROSS
-+#endif
-+
-+#ifdef TOOL_INCLUDE_DIR
-+#define INCLUDE_DEFAULTS_MUSL_TOOL			\
-+    { TOOL_INCLUDE_DIR, "BINUTILS", 0, 1, 0, 0},
-+#else
-+#define INCLUDE_DEFAULTS_MUSL_TOOL
-+#endif
-+
-+#ifdef NATIVE_SYSTEM_HEADER_DIR
-+#define INCLUDE_DEFAULTS_MUSL_NATIVE			\
-+    { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 2 },	\
-+    { NATIVE_SYSTEM_HEADER_DIR, 0, 0, 0, 1, 0 },
-+#else
-+#define INCLUDE_DEFAULTS_MUSL_NATIVE
-+#endif
-+
-+#if defined (CROSS_DIRECTORY_STRUCTURE) && !defined (TARGET_SYSTEM_ROOT)
-+# undef INCLUDE_DEFAULTS_MUSL_LOCAL
-+# define INCLUDE_DEFAULTS_MUSL_LOCAL
-+# undef INCLUDE_DEFAULTS_MUSL_NATIVE
-+# define INCLUDE_DEFAULTS_MUSL_NATIVE
-+#else
-+# undef INCLUDE_DEFAULTS_MUSL_CROSS
-+# define INCLUDE_DEFAULTS_MUSL_CROSS
-+#endif
-+
-+#undef INCLUDE_DEFAULTS
-+#define INCLUDE_DEFAULTS				\
-+  {							\
-+    INCLUDE_DEFAULTS_MUSL_GPP				\
-+    INCLUDE_DEFAULTS_MUSL_PREFIX			\
-+    INCLUDE_DEFAULTS_MUSL_CROSS				\
-+    INCLUDE_DEFAULTS_MUSL_TOOL				\
-+    INCLUDE_DEFAULTS_MUSL_NATIVE			\
-+    { GCC_INCLUDE_DIR, "GCC", 0, 1, 0, 0 },		\
-+    { 0, 0, 0, 0, 0, 0 }				\
-+  }
-+#endif
-Index: b/gcc/config/linux.opt
-===================================================================
---- a/gcc/config/linux.opt
-+++ b/gcc/config/linux.opt
-@@ -30,3 +30,7 @@
- muclibc
- Target Report RejectNegative Var(linux_libc,LIBC_UCLIBC) Negative(mbionic)
- Use uClibc C library
-+
-+mmusl
-+Target Report RejectNegative Var(linux_libc,LIBC_MUSL) Negative(mglibc)
-+Use musl C library
-Index: b/gcc/config/microblaze/linux.h
-===================================================================
---- a/gcc/config/microblaze/linux.h
-+++ b/gcc/config/microblaze/linux.h
-@@ -25,7 +25,23 @@
- #undef TLS_NEEDS_GOT
- #define TLS_NEEDS_GOT 1
- 
--#define DYNAMIC_LINKER "/lib/ld.so.1"
-+#if TARGET_BIG_ENDIAN_DEFAULT == 0 /* LE */
-+#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
-+#else
-+#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
-+#endif
-+
-+#undef MUSL_DYNAMIC_LINKER
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-microblaze" MUSL_DYNAMIC_LINKER_E ".so.1"
-+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
-+
-+#if DEFAULT_LIBC == LIBC_MUSL
-+#define DYNAMIC_LINKER MUSL_DYNAMIC_LINKER
-+#else
-+#define DYNAMIC_LINKER GLIBC_DYNAMIC_LINKER
-+#endif
-+
-+
- #undef  SUBTARGET_EXTRA_SPECS
- #define SUBTARGET_EXTRA_SPECS \
-   { "dynamic_linker", DYNAMIC_LINKER }
-Index: b/gcc/config/mips/linux64.h
-===================================================================
---- a/gcc/config/mips/linux64.h
-+++ b/gcc/config/mips/linux64.h
-@@ -29,4 +29,4 @@
- #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32"
- #define GNU_USER_DYNAMIC_LINKERN32 \
-   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERN32, UCLIBC_DYNAMIC_LINKERN32, \
--			 BIONIC_DYNAMIC_LINKERN32)
-+			 BIONIC_DYNAMIC_LINKERN32, MUSL_DYNAMIC_LINKER)
-Index: b/gcc/config/mips/linux.h
-===================================================================
---- a/gcc/config/mips/linux.h
-+++ b/gcc/config/mips/linux.h
-@@ -18,3 +18,11 @@
- <http://www.gnu.org/licenses/>.  */
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
-+
-+#if TARGET_ENDIAN_DEFAULT == 0 /* LE */
-+#define MUSL_DYNAMIC_LINKER_E "%{EB:;:el}"
-+#else
-+#define MUSL_DYNAMIC_LINKER_E "%{EL:el}"
-+#endif
-+#undef MUSL_DYNAMIC_LINKER
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-mips" MUSL_DYNAMIC_LINKER_E "%{msoft-float:-sf}.so.1"
-Index: b/gcc/config/rs6000/linux64.h
-===================================================================
---- a/gcc/config/rs6000/linux64.h
-+++ b/gcc/config/rs6000/linux64.h
-@@ -374,17 +374,23 @@
- #endif
- #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
- #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
-+#undef MUSL_DYNAMIC_LINKER32
-+#define MUSL_DYNAMIC_LINKER32 "/lib/ld-musl-powerpc.so.1"
-+#undef MUSL_DYNAMIC_LINKER64
-+#define MUSL_DYNAMIC_LINKER64 "/lib/ld-musl-powerpc64.so.1"
- #if DEFAULT_LIBC == LIBC_UCLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
- #elif DEFAULT_LIBC == LIBC_GLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
-+#elif DEFAULT_LIBC == LIBC_MUSL
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
- #else
- #error "Unsupported DEFAULT_LIBC"
- #endif
- #define GNU_USER_DYNAMIC_LINKER32 \
--  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32)
-+  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER32, UCLIBC_DYNAMIC_LINKER32, MUSL_DYNAMIC_LINKER32)
- #define GNU_USER_DYNAMIC_LINKER64 \
--  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64)
-+  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, MUSL_DYNAMIC_LINKER64)
- 
- #undef  DEFAULT_ASM_ENDIAN
- #if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN)
-Index: b/gcc/config/rs6000/secureplt.h
-===================================================================
---- a/gcc/config/rs6000/secureplt.h
-+++ b/gcc/config/rs6000/secureplt.h
-@@ -18,3 +18,4 @@
- <http://www.gnu.org/licenses/>.  */
- 
- #define CC1_SECURE_PLT_DEFAULT_SPEC "-msecure-plt"
-+#define LINK_SECURE_PLT_DEFAULT_SPEC "--secure-plt"
-Index: b/gcc/config/rs6000/sysv4.h
-===================================================================
---- a/gcc/config/rs6000/sysv4.h
-+++ b/gcc/config/rs6000/sysv4.h
-@@ -537,6 +537,9 @@
- #ifndef CC1_SECURE_PLT_DEFAULT_SPEC
- #define CC1_SECURE_PLT_DEFAULT_SPEC ""
- #endif
-+#ifndef LINK_SECURE_PLT_DEFAULT_SPEC
-+#define LINK_SECURE_PLT_DEFAULT_SPEC ""
-+#endif
- 
- /* Pass -G xxx to the compiler.  */
- #define	CC1_SPEC "%{G*} %(cc1_cpu)" \
-@@ -585,7 +588,8 @@
- 
- /* Override the default target of the linker.  */
- #define	LINK_TARGET_SPEC \
--  ENDIAN_SELECT("", " --oformat elf32-powerpcle", "")
-+  ENDIAN_SELECT("", " --oformat elf32-powerpcle", "") \
-+  "%{!mbss-plt: %{!msecure-plt: %(link_secure_plt_default)}}"
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
-@@ -763,15 +767,18 @@
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
- #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-powerpc.so.1"
- #if DEFAULT_LIBC == LIBC_UCLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{mmusl:" M ";:" U "}}"
-+#elif DEFAULT_LIBC == LIBC_MUSL
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{mglibc:" G ";:%{muclibc:" U ";:" M "}}"
- #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC
--#define CHOOSE_DYNAMIC_LINKER(G, U) "%{muclibc:" U ";:" G "}"
-+#define CHOOSE_DYNAMIC_LINKER(G, U, M) "%{muclibc:" U ";:%{mmusl:" M ";:" G "}}"
- #else
- #error "Unsupported DEFAULT_LIBC"
- #endif
- #define GNU_USER_DYNAMIC_LINKER \
--  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
-+  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER, MUSL_DYNAMIC_LINKER)
- 
- #define LINK_OS_LINUX_SPEC "-m elf32ppclinux %{!shared: %{!static: \
-   %{rdynamic:-export-dynamic} \
-@@ -894,6 +901,7 @@
-   { "link_os_openbsd",		LINK_OS_OPENBSD_SPEC },			\
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-+  { "link_secure_plt_default",	LINK_SECURE_PLT_DEFAULT_SPEC },		\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-Index: b/gcc/config/sh/linux.h
-===================================================================
---- a/gcc/config/sh/linux.h
-+++ b/gcc/config/sh/linux.h
-@@ -43,7 +43,15 @@
- 
- #define TARGET_ASM_FILE_END file_end_indicate_exec_stack
- 
-+#if TARGET_BIG_ENDIAN_DEFAULT /* BE */
-+#define MUSL_DYNAMIC_LINKER_E "eb"
-+#else
-+#define MUSL_DYNAMIC_LINKER_E
-+#endif
-+
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
-+#undef MUSL_DYNAMIC_LINKER
-+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-sh" MUSL_DYNAMIC_LINKER_E ".so.1"
- 
- #undef SUBTARGET_LINK_EMUL_SUFFIX
- #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
-Index: b/gcc/config.gcc
-===================================================================
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -550,7 +550,7 @@
- esac
- 
- # Common C libraries.
--tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
-+tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
- 
- # Common parts for widely ported systems.
- case ${target} in
-@@ -653,6 +653,9 @@
-     *-*-*uclibc*)
-       tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
-       ;;
-+    *-*-*musl*)
-+      tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
-+      ;;
-     *)
-       tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
-       ;;
-@@ -2135,6 +2138,10 @@
- 	    powerpc*-*-linux*paired*)
- 		tm_file="${tm_file} rs6000/750cl.h" ;;
- 	esac
-+        case ${target} in
-+            *-linux*-musl*)
-+                enable_secureplt=yes ;;
-+        esac
- 	if test x${enable_secureplt} = xyes; then
- 		tm_file="rs6000/secureplt.h ${tm_file}"
- 	fi
-Index: b/gcc/configure
-===================================================================
---- a/gcc/configure
-+++ b/gcc/configure
-@@ -26936,6 +26940,9 @@
-       gcc_cv_target_dl_iterate_phdr=no
-     fi
-     ;;
-+  *-linux-musl*)
-+    gcc_cv_target_dl_iterate_phdr=yes
-+    ;;
- esac
- 
- if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
-Index: b/gcc/configure.ac
-===================================================================
---- a/gcc/configure.ac
-+++ b/gcc/configure.ac
-@@ -4848,6 +4852,9 @@
-       gcc_cv_target_dl_iterate_phdr=no
-     fi
-     ;;
-+  *-linux-musl*)
-+    gcc_cv_target_dl_iterate_phdr=yes
-+    ;;
- esac
- GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
- if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
-Index: b/gcc/ginclude/stddef.h
-===================================================================
---- a/gcc/ginclude/stddef.h
-+++ b/gcc/ginclude/stddef.h
-@@ -181,6 +181,7 @@
- #ifndef _GCC_SIZE_T
- #ifndef _SIZET_
- #ifndef __size_t
-+#ifndef __DEFINED_size_t /* musl */
- #define __size_t__	/* BeOS */
- #define __SIZE_T__	/* Cray Unicos/Mk */
- #define _SIZE_T
-@@ -197,6 +198,7 @@
- #define ___int_size_t_h
- #define _GCC_SIZE_T
- #define _SIZET_
-+#define __DEFINED_size_t /* musl */
- #if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
-   || defined(__FreeBSD_kernel__)
- /* __size_t is a typedef on FreeBSD 5, must not trash it. */
-@@ -214,6 +216,7 @@
- typedef long ssize_t;
- #endif /* __BEOS__ */
- #endif /* !(defined (__GNUG__) && defined (size_t)) */
-+#endif /* __DEFINED_size_t */
- #endif /* __size_t */
- #endif /* _SIZET_ */
- #endif /* _GCC_SIZE_T */
-Index: b/libgcc/unwind-dw2-fde-dip.c
-===================================================================
---- a/libgcc/unwind-dw2-fde-dip.c
-+++ b/libgcc/unwind-dw2-fde-dip.c
-@@ -75,6 +75,13 @@
- # define USE_PT_GNU_EH_FRAME
- #endif
- 
-+/* For musl libc, TARGET_DL_ITERATE_PHDR gets defined by the configure
-+   script. */
-+#if !defined(inhibit_libc) && defined(HAVE_LD_EH_FRAME_HDR) \
-+    && defined(TARGET_DL_ITERATE_PHDR)
-+# define USE_PT_GNU_EH_FRAME
-+#endif
-+
- #if defined(USE_PT_GNU_EH_FRAME)
- 
- #include <link.h>
-Index: b/libgomp/config/posix/time.c
-===================================================================
---- a/libgomp/config/posix/time.c
-+++ b/libgomp/config/posix/time.c
-@@ -28,6 +28,8 @@
-    The following implementation uses the most simple POSIX routines.
-    If present, POSIX 4 clocks should be used instead.  */
- 
-+#define _POSIX_C_SOURCE 199309L /* for clocks */
-+
- #include "libgomp.h"
- #include <unistd.h>
- #if TIME_WITH_SYS_TIME
-Index: b/libitm/config/arm/hwcap.cc
-===================================================================
---- a/libitm/config/arm/hwcap.cc
-+++ b/libitm/config/arm/hwcap.cc
-@@ -40,7 +40,11 @@
- 
- #ifdef __linux__
- #include <unistd.h>
-+#ifdef __GLIBC__
- #include <sys/fcntl.h>
-+#else
-+#include <fcntl.h>
-+#endif
- #include <elf.h>
- 
- static void __attribute__((constructor))
-Index: b/libitm/config/linux/x86/tls.h
-===================================================================
---- a/libitm/config/linux/x86/tls.h
-+++ b/libitm/config/linux/x86/tls.h
-@@ -25,16 +25,19 @@
- #ifndef LIBITM_X86_TLS_H
- #define LIBITM_X86_TLS_H 1
- 
--#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
-+#if defined(__GLIBC_PREREQ)
-+#if __GLIBC_PREREQ(2, 10)
- /* Use slots in the TCB head rather than __thread lookups.
-    GLIBC has reserved words 10 through 13 for TM.  */
- #define HAVE_ARCH_GTM_THREAD 1
- #define HAVE_ARCH_GTM_THREAD_DISP 1
- #endif
-+#endif
- 
- #include "config/generic/tls.h"
- 
--#if defined(__GLIBC_PREREQ) && __GLIBC_PREREQ(2, 10)
-+#if defined(__GLIBC_PREREQ)
-+#if __GLIBC_PREREQ(2, 10)
- namespace GTM HIDDEN {
- 
- #ifdef __x86_64__
-@@ -101,5 +104,6 @@
- 
- } // namespace GTM
- #endif /* >= GLIBC 2.10 */
-+#endif
- 
- #endif // LIBITM_X86_TLS_H
-Index: b/libstdc++-v3/configure.host
-===================================================================
---- a/libstdc++-v3/configure.host
-+++ b/libstdc++-v3/configure.host
-@@ -264,6 +264,13 @@
-     os_include_dir="os/bsd/freebsd"
-     ;;
-   gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
-+    # check for musl by target
-+    case "${host_os}" in
-+      *-musl*)
-+        os_include_dir="os/generic"
-+        ;;
-+      *)
-+
-     if [ "$uclibc" = "yes" ]; then
-       os_include_dir="os/uclibc"
-     elif [ "$bionic" = "yes" ]; then
-@@ -272,6 +279,9 @@
-       os_include_dir="os/gnu-linux"
-     fi
-     ;;
-+
-+    esac
-+    ;;
-   hpux*)
-     os_include_dir="os/hpux"
-     ;;
diff --git a/package/gcc/4.8.5/930-libgcc-disable-split-stack-nothreads.patch b/package/gcc/4.8.5/930-libgcc-disable-split-stack-nothreads.patch
deleted file mode 100644
index 7799c12..0000000
--- a/package/gcc/4.8.5/930-libgcc-disable-split-stack-nothreads.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-disable split-stack for non-thread builds
-
-Signed-off-by: Waldemar Brodkorb <wbx at openadk.org>
-
-diff -Nur gcc-4.8.5.orig/libgcc/config/t-stack gcc-4.8.5/libgcc/config/t-stack
---- gcc-4.8.5.orig/libgcc/config/t-stack	2010-10-01 21:31:49.000000000 +0200
-+++ gcc-4.8.5/libgcc/config/t-stack	2016-03-07 05:28:12.000000000 +0100
-@@ -1,4 +1,6 @@
- # Makefile fragment to provide generic support for -fsplit-stack.
- # This should be used in config.host for any host which supports
- # -fsplit-stack.
-+ifeq ($(enable_threads),yes)
- LIB2ADD_ST += $(srcdir)/generic-morestack.c $(srcdir)/generic-morestack-thread.c
-+endif
diff --git a/package/gcc/4.8.5/940-uclinux-enable-threads.patch b/package/gcc/4.8.5/940-uclinux-enable-threads.patch
deleted file mode 100644
index e58e824..0000000
--- a/package/gcc/4.8.5/940-uclinux-enable-threads.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-Enable POSIX threads for uClinux targets
-Reported upstream:
-https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71721
-
-Signed-off-by: Waldemar Brodkorb <wbx at openadk.org>
-
-diff -Nur gcc-4.8.5.orig/gcc/config.gcc gcc-4.8.5/gcc/config.gcc
---- gcc-4.8.5.orig/gcc/config.gcc	2015-05-21 22:57:29.000000000 +0200
-+++ gcc-4.8.5/gcc/config.gcc	2016-07-02 20:35:24.107644834 +0200
-@@ -741,6 +741,9 @@
- *-*-uclinux*)
-   extra_options="$extra_options gnu-user.opt"
-   use_gcc_stdint=wrap
-+  case ${enable_threads} in
-+    "" | yes | posix) thread_file='posix' ;;
-+  esac
-   tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
-   ;;
- *-*-rdos*)
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index f1c2faf..61b0582 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -8,29 +8,6 @@ choice
 	help
 	  Select the version of gcc you wish to use.
 
-config BR2_GCC_VERSION_4_8_X
-	bool "gcc 4.8.x"
-	# Broken or unsupported architectures
-	depends on !BR2_microblaze && !BR2_arc && !BR2_or1k \
-		&& !BR2_powerpc64le && !BR2_nios2 && !BR2_bfin
-	# Broken or unsupported ARM cores
-	depends on !BR2_cortex_a12 && !BR2_cortex_a17 && !BR2_ARM_CPU_ARMV8
-	# Broken or unsupported PPC cores
-	depends on !BR2_powerpc_power8
-	# Unsupported MIPS cores
-	depends on !BR2_mips_interaptiv
-	# gcc-4.8.x + binutils-2.25 is broken for MIPS
-	depends on !((BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el) && BR2_BINUTILS_VERSION_2_25_X)
-	# Unsupported for MIPS R5
-	depends on !BR2_MIPS_CPU_MIPS32R5 && !BR2_MIPS_CPU_MIPS64R5
-	# Unsupported for MIPS R6
-	depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
-	# musl ppc64 unsupported
-	depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64le))
-	# musl mips64 unsupported
-	depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_mips64 || BR2_mips64el))
-	select BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
-
 config BR2_GCC_VERSION_ARC
 	bool "gcc arc (6.x)"
 	# Only supported architecture
@@ -112,7 +89,6 @@ config BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE
 
 config BR2_GCC_VERSION
 	string
-	default "4.8.5"     if BR2_GCC_VERSION_4_8_X
 	default "4.9.4"     if BR2_GCC_VERSION_4_9_X
 	default "5.4.0"     if BR2_GCC_VERSION_5_X
 	default "6.3.0"     if BR2_GCC_VERSION_6_X
diff --git a/package/uclibc/uclibc.mk b/package/uclibc/uclibc.mk
index bbf389e..a5a20ea 100644
--- a/package/uclibc/uclibc.mk
+++ b/package/uclibc/uclibc.mk
@@ -119,12 +119,6 @@ define UCLIBC_ARM_ABI_CONFIG
 	$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_EABI,$(@D)/.config)
 endef
 
-# Thumb1 build is broken with threads with old gcc versions (< 4.8). Since
-# all cores supporting Thumb1 also support ARM, we use ARM code in this case.
-ifeq ($(BR2_GCC_VERSION_4_8_X)$(BR2_ARM_INSTRUCTIONS_THUMB)$(BR2_TOOLCHAIN_HAS_THREADS),yyy)
-UCLIBC_EXTRA_CFLAGS += -marm
-endif
-
 ifeq ($(BR2_BINFMT_FLAT),y)
 define UCLIBC_ARM_BINFMT_FLAT
 	$(call KCONFIG_DISABLE_OPT,DOPIC,$(@D)/.config)
-- 
2.9.4




More information about the buildroot mailing list