[Buildroot] [BuildRoot] at91sam9x5ek_defconfig not booting

Alejandro Ariel Fachini alefachinic at gmail.com
Fri Oct 13 18:36:24 UTC 2017


Mr Thomas:
I made a full new build from tag 2017.08.
 commands:
                make at91sam9x5ek_defconfig
                make

I flashed this binaries WITH SAM-BA 2.12 on WINDOWS, because my Ubuntu is a
VirtualMachine.

I share the results with full flashing Console and Reset After Flashing:

> -I- -- NandFlash SAM-BA applet 2.12 --
>
> -I- -- SAM9XX5-EK
>
> -I- -- Compiled: Jun 27 2012 13:39:59 --
>
> -I- INIT command
>
> -I- CHIP ID ad da 10 95 44
>
> -I- Nandflash ID is 0x9510DAAD
>
> -I-     Nandflash driver initialized
>
> -I-     pageSize : 0x800 blockSize : 0x20000 blockNb : 0x800
>
> -I-     Nandflash PMECC initialized
>
> -I-     End of applet (command : 0 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #0 to #256
>
> -I- SkipBlockNandFdFlash_EraseBsock: Block is BAD
>
> -I- Found block #44 BAD, skip it
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #256 to #512
>
> -I- SkipBlockNandFlash_EraseBlock: Block is BAD
>
> -I- Found block #415 BAD, skip it
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #512 to #768
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE coommand
>
> -I- Erase block from #768 to #1024
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #1024 to #1280
>
> -I- Batch Erasee achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #1280 to #1536
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #1536 to #1792
>
> -I- SkipBlockNandFlash_EraseBlock: Block is BAD
>
> -I- Found block #1586 BAD, skip it
>
> -I- Batch Erase achieved
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- BATCH ERASE command
>
> -I- Erase block from #1792 to #2048
>
> -I- Full Erase achieved, erase type is 0
>
> -I-     End of applet (command : 14 --- status : 0)
>
> -I- SEND BOOT FILE command
>
> -I-     End of applet (command : 16 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x40000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x2, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x60000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x3, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x80000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
> )-I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x5, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
>
> I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xc0000, buffer at 0x20010df0, of 0x67e0 Bytes
>
> -I- WRITE at block 0x6, page 0x0, offset 0x0
>
> -I- Retrieve data in block,6
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x180000, buffer at 0x20010df0, of 0x72fc
> Bytes
>
> -I- WRITE at block 0xc, page 0x0, offset 0x0
>
> -I- Retrieve data in block,12
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x200000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x10, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x220000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x11, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x240000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x12, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x260000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x13, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x280000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x14, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x2a0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x15, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x2c0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x16, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x2e0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x17, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x300000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x18, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x320000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x19, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x340000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1a, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x360000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1b, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x380000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1c, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x3a0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1d, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x3c0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1e, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x3e0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x1f, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x400000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x20, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initializee
>
> -I- WRITE arguments : offset 0x420000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x21, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x440000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x22, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x460000, buffer at 0x20010dd0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x23, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x480000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x24, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x4a0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x25, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x4c0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x26, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x4e0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x27, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x500000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x28, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x520000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x29, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x540000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x2a, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x560000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x2b, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x580000, buffer at 0x20010df0, of 0x1a970
> Bytes
>
> -I- WRITE at block 0x2c, page 0x0, offset 0x0
>
> -I- Retrieve data in block,44
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x800000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x40, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x820000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x41, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x840000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x42, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x860000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x43, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x880000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x44, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x8a0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x45, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x8c0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x46, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x8e0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x47, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x900000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x48, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x920000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x49, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x940000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4a, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x960000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4b, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x980000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4c, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x9a0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4d, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x9c0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4e, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0x9e0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x4f, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa00000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x50, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa20000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x51, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa40000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x52, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa60000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x53, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xa80000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x54, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xaa0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x55, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xac0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x56, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xae0000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x57, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xb00000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x58, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xb20000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x59, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xb40000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x5a, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xb60000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x5b, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> -I- SEND FILE command
>
> -I- Pmecc initialized
>
> -I- WRITE arguments : offset 0xb80000, buffer at 0x20010df0, of 0x20000
> Bytes
>
> -I- WRITE at block 0x5c, page 0x0, offset 0x0
>
> -I-     End of applet (command : 2 --- status : 0)
>
> RomBOOT
>
>
>
> AT91Bootstrap 3.8.7 (lun oct  9 13:46:05 ART 2017)
>
> 1-Wire: Loading 1-Wire information ...
> 1-Wire: ROM Searching ... Done, 3 1-Wire chips found
>
> 1-Wire: BoardName | [Revid] | VendorName
>   #0  SAM9x5-EK [B0]      FLEX
>   #1  SAM9X35-CM [B2]      RONETIX
>   #2  SAM9x5-DM [B0]      FLEX
>
> 1-Wire: Board sn: 0x4010466 revision: 0x10421
>
> NAND: ONFI flash detected
> NAND: ONFI para CRC error!
> NAND: Manufacturer ID: 0xad Chip ID: 0xda
> WARNING: Fail to disable On-Die ECC
> Nand flash is not ONFI compliant, use 2-bit/512-byte ecc.
> NAND: Initialize PMECC params, cap: 2, sector: 512
> NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x26f00000
> NAND: Done to load image
> <debug_uart> No serial driver found
> resetting ...
> RomBOOT
>
>
>
> AT91Bootstrap 3.8.7 (lun oct  9 13:46:05 ART 2017)
>
> 1-Wire: Loading 1-Wire information ...
> 1-Wire: ROM Searching ... Done, 3 1-Wire chips found
>
> 1-Wire: BoardName | [Revid] | VendorName
>   #0  SAM9x5-EK [B0]      FLEX
>   #1  SAM9X35-CM [B2]      RONETIX
>   #2  SAM9x5-DM [B0]      FLEX
>
> 1-Wire: Board sn: 0x4010466 revision: 0x10421
>
> NAND: ONFI flash detected
> NAND: ONFI para CRC error!
> NAND: Manufacturer ID: 0xad Chip ID: 0xda
> WARNING: Fail to disable On-Die ECC
> Nand flash is not ONFI compliant, use 2-bit/512-byte ecc.
> NAND: Initialize PMECC params, cap: 2, sector: 512
> NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x26f00000
> NAND: Done to load image
> <debug_uart> No serial driver found
> resetting ...
> RomBOOT
>
>
>
> AT91Bootstrap 3.8.7 (lun oct  9 13:46:05 ART 2017)
>
> 1-Wire: Loading 1-Wire information ...
> 1-Wire: ROM Searching ... Done, 3 1-Wire chips found
>
> 1-Wire: BoardName | [Revid] | VendorName
>   #0  SAM9x5-EK [B0]      FLEX
>   #1  SAM9X35-CM [B2]      RONETIX
>   #2  SAM9x5-DM [B0]      FLEX
>
> 1-Wire: Board sn: 0x4010466 revision: 0x10421
>
> NAND: ONFI flash detected
> NAND: ONFI para CRC error!
> NAND: Manufacturer ID: 0xad Chip ID: 0xda
> WARNING: Fail to disable On-Die ECC
> Nand flash is not ONFI compliant, use 2-bit/512-byte ecc.
> NAND: Initialize PMECC params, cap: 2, sector: 512
> NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x26f00000
> NAND: Done to load image
> <debug_uart> No serial driver found
> resetting ...
> RomBOOT
>


IMPORTANT: I tried also flashing with a *.bat invoking the nandflash.tcl
script, but it seems that its not directly compatible with windows since it
wont find the paths to the files. But it wont work.

As i see now the problem is in U-boot default config???

2017-10-13 10:50 GMT-03:00 Thomas Petazzoni <
thomas.petazzoni at free-electrons.com>:

> Hello,
>
> On Fri, 13 Oct 2017 09:44:06 -0300, Alejandro Ariel Fachini wrote:
>
> > Thanks For your help. I used the tag 2017.03 and Still got the same
> Result
>
> There is no 2017.03 tag, so this is not possible.
>
> > in fact the first thing i did was use the latest version of BuildRoot.
> >  If i understand correctly:
> > At first Boot after Install binaries i should set environment variables,
>
> No, the default environment variables set inside the U-Boot binary
> should be good enough.
>
> > How do I make the boot into Kernel auomatic? I believe all tthis is
> U-Boot
> > Related? If thats so just tell me and i wont bother anymore.
>
> This is all U-Boot related of course. Please read the materials that I
> pointed in my previous e-mail. And as I said, the default U-Boot
> environment should automatically load and boot a Linux kernel, if I
> remember correctly.
>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171013/32cb346e/attachment-0002.html>


More information about the buildroot mailing list