[Buildroot] Orange Pi Prime does not boot
Jagan Teki
jagan at amarulasolutions.com
Fri Jul 13 15:13:49 UTC 2018
On Tue, Jul 10, 2018 at 2:23 PM, <aai at tut.by> wrote:
> Hello,
>
> orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>
> I do:
> make orangepi_prime_defconfig
> make
>
> boot log:
> --------------------------------------------------------------
> Terminal ready
>
> U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
> DRAM: 2048 MiB
> Trying to boot from MMC1
>
>
> U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>
> CPU: Allwinner H5 (SUN50I)
> Model: OrangePi Prime
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found U-Boot script /boot.scr
> reading /boot.scr
> 277 bytes read in 14 ms (18.6 KiB/s)
> ## Executing script at 4fc00000
> reading Image
> 17365504 bytes read in 870 ms (19 MiB/s)
> reading sun50i-h5-orangepi-prime.dtb
> 13714 bytes read in 25 ms (535.2 KiB/s)
> ## Flattened Device Tree blob at 4fa00000
> Booting using the fdt blob at 0x4fa00000
> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>
> Starting kernel ...
> --------------------------------------------------------------
It's booting fine with my side, here is full boot log[1]
[1] https://paste.ubuntu.com/p/mQsRxMrKnh/
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the buildroot
mailing list