[Buildroot] [PATCH 2/2] configs/qemu: add qemu_riscv32_virt_defconfig

[Romain Naour]

Le 20/10/2018 à 23:24, Mark Corbin a écrit :
> Add RISC-V 32-bit defconfig for QEMU virt machine.
> 
> Tested with QEMU 2.12.1
> 

Reviewed-by: Romain Naour <romain.naour at gmail.com>
Tested-by: Romain Naour <romain.naour at gmail.com>

Best regards,
Romain


> Signed-off-by: Mark Corbin <mark.corbin at embecosm.com>
> ---
>  board/qemu/riscv32-virt/linux.config | 23 +++++++++++++++++++++++
>  board/qemu/riscv32-virt/readme.txt   |  7 +++++++
>  configs/qemu_riscv32_virt_defconfig  | 24 ++++++++++++++++++++++++
>  3 files changed, 54 insertions(+)
>  create mode 100644 board/qemu/riscv32-virt/linux.config
>  create mode 100644 board/qemu/riscv32-virt/readme.txt
>  create mode 100644 configs/qemu_riscv32_virt_defconfig
> 
> diff --git a/board/qemu/riscv32-virt/linux.config b/board/qemu/riscv32-virt/linux.config
> new file mode 100644
> index 0000000000..c25583f768
> --- /dev/null
> +++ b/board/qemu/riscv32-virt/linux.config
> @@ -0,0 +1,23 @@
> +CONFIG_ARCH_RV32I=y
> +CONFIG_SMP=y
> +CONFIG_NR_CPUS=8
> +CONFIG_PCI=y
> +CONFIG_SYSVIPC=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +# CONFIG_WIRELESS is not set
> +CONFIG_VIRTIO_BLK=y
> +CONFIG_NETDEVICES=y
> +CONFIG_VIRTIO_NET=y
> +# CONFIG_ETHERNET is not set
> +# CONFIG_WLAN is not set
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +CONFIG_VIRT_DRIVERS=y
> +CONFIG_VIRTIO_MMIO=y
> +CONFIG_EXT2_FS=y
> +CONFIG_EXT4_FS=y
> +CONFIG_TMPFS=y
> diff --git a/board/qemu/riscv32-virt/readme.txt b/board/qemu/riscv32-virt/readme.txt
> new file mode 100644
> index 0000000000..2da99580e5
> --- /dev/null
> +++ b/board/qemu/riscv32-virt/readme.txt
> @@ -0,0 +1,7 @@
> +Run the emulation with:
> +
> +  qemu-system-riscv32 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
> +
> +The login prompt will appear in the terminal that started Qemu.
> +
> +Tested with QEMU 2.12.1
> diff --git a/configs/qemu_riscv32_virt_defconfig b/configs/qemu_riscv32_virt_defconfig
> new file mode 100644
> index 0000000000..aec85e4639
> --- /dev/null
> +++ b/configs/qemu_riscv32_virt_defconfig
> @@ -0,0 +1,24 @@
> +# Architecture
> +BR2_riscv=y
> +
> +# System
> +BR2_SYSTEM_DHCP="eth0"
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_GENERIC_GETTY=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +
> +# Linux headers same as kernel, a 4.15 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/riscv/riscv-linux.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fe92d7905c6ea0ebeabeb725b8040754ede7c220"
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/riscv32-virt/linux.config"
> +
> +# Bootloader
> +BR2_TARGET_RISCV_PK=y
>