[Buildroot] [PATCH 3/4] configs: bpi-m64: Use Mainline ARM ATF

Andre Przywara andre.przywara at arm.com
Mon Sep 3 09:06:40 UTC 2018


Hi,

On 03/09/18 09:26, Jagan Teki wrote:
> Use Mainline ARM ATF for bananapi-m64 board instead
> Andre's github.

Have you tested it? The mainline ATF is not feature-complete yet, so in
comparison to the old port you are missing the PMIC setup. This breaks
power off and, more importantly, Ethernet support in U-Boot. I have some
code to introduce proper (even better) PMIC support, just didn't come
around to clean it up and post it.
Meanwhile I would suggest to stick to the old port - actually this was
the reason I didn't advertise this more widely yet.

Cheers,
Andre.

> 
> Cc: Andre Przywara <andre.przywara at arm.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  configs/bananapi_m64_defconfig | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
> index 7d1ed18..db39903 100644
> --- a/configs/bananapi_m64_defconfig
> +++ b/configs/bananapi_m64_defconfig
> @@ -8,9 +8,9 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
>  # Firmware
>  BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
>  BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
> -BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
> -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="cffb00342897ed73a2bb9fc7a1860102bd927f2e"
>  BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
>  
>  # Bootloader
> 



More information about the buildroot mailing list