[Buildroot] [PATCHv2 1/2] configs/raspberrypi: change deprecated pi3-miniuart-bt option to miniuart-bt
Peter Seiderer
ps.report at gmx.net
Tue Dec 3 20:12:04 UTC 2019
Hello Arthur,
thanks for the patch, one nitpick below...
On Tue, 3 Dec 2019 14:26:57 +0100, Arthur Courtel <arthur.courtel at smile.fr> wrote:
> This option will be used in RPI4 config in order to have a working serial port on gpios.
> This change makes this option not only RPI3 specific.
>
> Signed-off-by: Arthur Courtel <arthur.courtel at smile.fr>
> ---
> board/raspberrypi/post-image.sh | 8 ++++----
> board/raspberrypi/readme.txt | 2 +-
> configs/raspberrypi3_64_defconfig | 2 +-
> configs/raspberrypi3_defconfig | 2 +-
> configs/raspberrypi3_qt5we_defconfig | 2 +-
> configs/raspberrypi4_defconfig | 2 +-
> 6 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh
> index bbeb0bc721..9dbd98ef9b 100755
> --- a/board/raspberrypi/post-image.sh
> +++ b/board/raspberrypi/post-image.sh
> @@ -10,13 +10,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> for arg in "$@"
> do
> case "${arg}" in
> - --add-pi3-miniuart-bt-overlay)
> + --add-miniuart-bt-overlay)
Maybe keep additional the legacy '--add-pi3-miniuart-bt-overlay' option for people
using old custom config files?
Will do a short (pi3 only) test the next days...
Regards,
Peter
> if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
> - echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
> + echo "Adding 'dtoverlay=miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
> cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
>
> -# fixes rpi3 ttyAMA0 serial console
> -dtoverlay=pi3-miniuart-bt
> +# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
> +dtoverlay=miniuart-bt
> __EOF__
> fi
> ;;
> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
> index 69c9f9b20a..8b3de6d251 100644
> --- a/board/raspberrypi/readme.txt
> +++ b/board/raspberrypi/readme.txt
> @@ -78,7 +78,7 @@ After building, you should obtain this tree:
> [1] Not all of them will be present, depending on the RaspberryPi
> model you are using.
>
> -[2] Only for the Raspberry Pi 3/4 Models (overlay pi3-miniuart-bt is needed
> +[2] Only for the Raspberry Pi 3/4 Models (overlay miniuart-bt is needed
> to enable the RPi3 serial console otherwise occupied by the bluetooth
> chip). Alternative would be to disable the serial console in cmdline.txt
> and /etc/inittab.
> diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig
> index 27141f364e..b9a070fb82 100644
> --- a/configs/raspberrypi3_64_defconfig
> +++ b/configs/raspberrypi3_64_defconfig
> @@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> # BR2_TARGET_ROOTFS_TAR is not set
> BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
> -BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-pi3-miniuart-bt-overlay"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-miniuart-bt-overlay"
> diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
> index 01aa239805..530eb0ab3f 100644
> --- a/configs/raspberrypi3_defconfig
> +++ b/configs/raspberrypi3_defconfig
> @@ -34,4 +34,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> # BR2_TARGET_ROOTFS_TAR is not set
> BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
> -BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
> diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
> index 775eb9114e..21c5d1dc4c 100644
> --- a/configs/raspberrypi3_qt5we_defconfig
> +++ b/configs/raspberrypi3_qt5we_defconfig
> @@ -48,4 +48,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="360M"
> BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
> -BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay --gpu_mem_1024=200"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --gpu_mem_1024=200"
> diff --git a/configs/raspberrypi4_defconfig b/configs/raspberrypi4_defconfig
> index 6eea0ca816..a216463e28 100644
> --- a/configs/raspberrypi4_defconfig
> +++ b/configs/raspberrypi4_defconfig
> @@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> # BR2_TARGET_ROOTFS_TAR is not set
> BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
> -BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
More information about the buildroot
mailing list