[Buildroot] Build Orange Pi One doesn't boot

[Arnout Vandecappelle]

On 27/06/2019 21:04, Benjamin Marty wrote:
> Hello,
> 
> I tried to build with the Version 2019.05 from the Website and also with
> master from Github. It builds fine but doesn't boot on the target device.
> It looks like the kernel somehow crashes during booting. I'm not sure if I
> did something wrong.
> 
> Benjamin
> 
> # make orangepi_one_defconfig
> # make -j9
> sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 bs=4M
> 
> 
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found U-Boot script /boot.scr
> reading /boot.scr
> 301 bytes read in 15 ms (19.5 KiB/s)
> ## Executing script at 43100000
> reading zImage
> 3803896 bytes read in 192 ms (18.9 MiB/s)
> reading sun8i-h3-orangepi-one.dtb
> 15153 bytes read in 26 ms (568.4 KiB/s)
> ## Flattened Device Tree blob at 43000000
>    Booting using the fdt blob at 0x43000000
>    Using Device Tree in place at 43000000, end 43006b30
> 
> Starting kernel ...
> 
> data abort

 That might be a compiler issue... Could you try to change the toolchain to an
external toolchain (ARM 2019.03), do 'make clean; make' and see if that improves
things?

 Regards,
 Arnout

> pc : [<5dfacea8>]   lr : [<5df7eef3>]
> reloc pc : [<4a02eea8>]   lr : [<4a000ef3>]
> sp : 59f59020  ip : 59f5e8fa fp : 00000004
> r10: 59f93a1c  r9 : 59f5dee0 r8 : 00000400
> r7 : 00000000  r6 : 42000000 r5 : 43000000  r4 : 00000000
> r3 : 43000000  r2 : 43000000 r1 : 00000000  r0 : 00000000
> Flags: nZCv  IRQs off  FIQs off  Mode UK6_32
> Resetting CPU ...
> 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>