[Buildroot] [PATCH 2/2] configs/freescale_imx7ulpevk: new defconfig
Fabrice Goucem
fabrice.goucem at nxp.com
Wed Oct 30 13:43:53 UTC 2019
On Tue, 2019-10-29 at 15:09 -0300, Fabio Estevam wrote:
> > .gitlab-ci.yml | 1 +
> > DEVELOPERS | 2 +
> > board/freescale/imx7ulpevk/readme.txt | 65
> > +++++++++++++++++++
> > configs/freescale_imx7ulpevk_defconfig | 28 ++++++++
> > package/freescale-imx/Config.in | 8 ++-
> > .../imx-m4-firmware/imx-m4-firmware.hash | 1 +
> > .../imx-m4-firmware/imx-m4-firmware.mk | 13 +++-
>
> The M4 firmware changes should not be part of this patch.
>
> > +Boot the i.MX7ULP EVK board
> > +===========================
> > +
> > +To boot your newly created system (refer to the i.MX 7ULP EVK
> > Quick Start Guide [1] for guidance):
> > +- insert the SD card in the micro SD slot of the board;
> > +- put a micro USB cable into the Debug USB Port and connect using
> > a terminal
> > + emulator at 115200 bps, 8n1;
> > +- power on the board.
>
> You should include some instructions to tell the user how to flash
> the
> QSPI flash with the M4 SDK binary.
Thanks for your review Fabio.
I've followed your comments and resubmitted the series of patches.
Fabrice
More information about the buildroot
mailing list