[Buildroot] [PATCH v4 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode
Sergey Matyukevich
geomatsi at gmail.com
Thu Feb 6 09:50:24 UTC 2020
> Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for the boot mode.
> Because the RCW binary can be stored in different media, for example:
> sd - RCW locate in SD card, boot the board from SD card
> emmc - RCW locate in eMMC chip, boot the board from eMMC chip
> qspi - RCW locate in QSPI flash, boot the board from QSPI flash
> flexspi_nor - RCW locate in flexSPI, boot the board from flexSPI Nor/Nand flash
>
> Signed-off-by: Changming Huang <jerry.huang at nxp.com>
> ---
> changes since v3:
> 1. split this option from board patch.
> ---
> package/nxp/qoriq-rcw/Config.in.host | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host
> index 9bf55894e8..7f5fbb3202 100644
> --- a/package/nxp/qoriq-rcw/Config.in.host
> +++ b/package/nxp/qoriq-rcw/Config.in.host
> @@ -37,4 +37,10 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_BIN
>
> If this option is empty, no rcw file is used.
>
> +config BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE
> + string "QorIQ RCW Boot mode"
> + depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH
> + help
> + Specify the boot mode, for example, sd, emmc, flexspi_nor.
> +
> endif
Does it make sense to add any default value for this option ?
Regards,
Sergey
More information about the buildroot
mailing list