[Buildroot] [PATCH v2 2/2] package/qt5/qt5webengine: fix build dependencies for autodetected packages
Nathan Ford
nford at westpond.com
Fri Feb 28 22:04:26 UTC 2020
Hello Peter,
On Fri, Feb 28, 2020 at 3:23 PM Peter Seiderer <ps.report at gmx.net> wrote:
>
> Hello Nate,
>
> On Fri, 28 Feb 2020 20:24:31 +0100, Peter Seiderer <ps.report at gmx.net> wrote:
>
> > Hello Nate,
> >
> > On Fri, 28 Feb 2020 12:37:22 -0500, Nathan Ford <nford at westpond.com> wrote:
> >
> > > I ran into a linker error when I tried to enable minizip, so I omitted it.
> >
> > That is sad...., but is not solved by omitting the dependency (but maybe
> > hidden due to build order....on the cost of reproducibility)..., but
> > there is no option to disable minizip support (only detected by pkg-config
> > and the minizip.pc file provided by minizip-2.9.1, but the version
> > seems to be not compatible)...
> >
> > >
> > > Did you re-compile qt5base after selecting png / jpeg / harfbuzz?
> > > qt5webengine enables them via the qt build system.
> >
> > Yes, full re-build ;-)
> >
> > But see no direct enabling through qt5webengine options/select, maybe
> > indirect?
> >
> > The jpeg test failes with:
> >
> > > main.cpp:12:5: error: ‘jpeg_crop_scanline’ was not declared in this scope; did you mean ‘jpeg_read_scanlines’?
> > > 12 | jpeg_crop_scanline(nullptr, &dummy, &dummy);
> > > | ^~~~~~~~~~~~~~~~~~
> > > | jpeg_read_scanlines
> > > main.cpp:13:5: error: ‘jpeg_skip_scanlines’ was not declared in this scope; did you mean ‘jpeg_read_scanlines’?
> > > 13 | jpeg_skip_scanlines(nullptr, dummy);
> > > | ^~~~~~~~~~~~~~~~~~~
> > > | jpeg_read_scanlines
> >
> > Maybe incompatible version?
>
> With BR2_PACKAGE_JPEG_TURBO (instead of BR2_PACKAGE_LIBJPEG) the
> detection succeeds...
>
> Regards,
> Peter
>
> >
> > >
> > > icu needs to be enabled explicitly similar to ffmpeg. Don't remember
> > > why I omitted it. I'm compiling now to see if there was an issue.
> >
> > Did take a look at build/qt5webengine-5.12.7/config_help.txt:
> >
> > WebEngine options:
> >
> > -webengine-alsa ................ Enable ALSA support [auto] (Linux only)
> > -webengine-pulseaudio .......... Enable PulseAudio support [auto]
> > (Linux only)
> > -webengine-embedded-build ...... Enable Linux embedded build [auto]
> > (Linux only)
> > -webengine-icu ................. Use system ICU libraries [system/qt]
> > (Linux only)
> > -webengine-ffmpeg .............. Use system FFmpeg libraries [system/qt]
> > (Linux only)
> > -webengine-opus ................ Use system Opus libraries [system/qt]
> > (Linux only)
> > -webengine-webp ................ Use system WebP libraries [system/qt]
> > (Linux only)
> > -webengine-pepper-plugins ...... Enable use of Pepper Flash and Widevine
> > plugins [auto]
> > -webengine-printing-and-pdf .... Enable use of printing and output to PDF
> > [auto]
> > -webengine-proprietary-codecs .. Enable support for proprietary codecs [no]
> > -webengine-spellchecker ........ Enable support for spellchecker [yes]
> > -webengine-native-spellchecker . Enable support for native spellchecker [no]
> > (macOS only)
> > -webengine-webrtc .............. Enable support for WebRTC [auto]
> >
> > There are more 'auto' options, e.g. '-webengine-pulseaudio' which should
> > be properly supported including the dependencies by the qt5webengine
> > package (or explicitly disabled)...
> >
I get a linker error when I enable -webengine-icu. Looks like when ICU
is enabled the build gets confused between target and host maybe.
FAILED: v8_snapshot/mksnapshot
/home/nate/buildroot/output_container/host/bin/python2
"../../3rdparty/chromium/build/toolchain/gcc_link_wrapper.py"
--output="v8_snapshot/mksnapshot" -- /usr/bin/g++ -pie
-Wl,--fatal-warnings -Wl,--build-id=sha1 -fPIC -Wl,-z,noexecstack
-Wl,-z,now -Wl,-z,relro -Wl,-z,defs -Wl,--as-needed -m64
-Wl,-rpath-link=v8_snapshot -Wl,--disable-new-dtags -Wl,-O2
-Wl,--gc-sections
-L/home/nate/buildroot/output_container/host/x86_64-buildroot-linux-gnu/sysroot/usr/lib
-o "v8_snapshot/mksnapshot" -Wl,--start-group
@"v8_snapshot/mksnapshot.rsp" -Wl,--end-group -ldl -lpthread -lrt
-licui18n -licuuc -licudata
/usr/bin/ld: cannot find /lib64/libm.so.6
/usr/bin/ld: cannot find /usr/lib64/libmvec_nonshared.a
/usr/bin/ld: cannot find /lib64/libmvec.so.1
> > >
> > > If libxml2/libxslt is checked, qt5webengine will skip them because
> > > libxml2 is not built with ICU support. libxml2 needs a configure
> > > switch to explicitly enable it. I have a patch that does this if ICU
> > > is enabled, but I don't know if implicitly enabling it would have
> > > ramifications, otherwise why is it not auto detected?
> >
> > The libxml2/libxslt test simply fails with:
> >
> > > xml2.cpp:31:2: error: #error "libxml icu not enabled"
> > > 31 | #error "libxml icu not enabled"
> > > | ^~~~~
Correct. libxml does not enable icu without something like the following:
diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk
index ea6a8c1..89ff733 100644
--- a/package/libxml2/libxml2.mk
+++ b/package/libxml2/libxml2.mk
@@ -49,6 +49,10 @@ else
LIBXML2_CONF_OPTS += --without-iconv
endif
+ifeq ($(BR2_PACKAGE_ICU),y)
+LIBXML2_CONF_OPTS += --with-icu
+endif
+
$(eval $(autotools-package))
$(eval $(host-autotools-package))
--Nate
> >
> > Regards,
> > Peter
> >
> > >
> > > --Nate
> > >
> > >
> > >
> > > On Fri, Feb 28, 2020 at 10:59 AM Peter Seiderer <ps.report at gmx.net> wrote:
> > > >
> > > > Re-add CC: Nathan Ford <nford at westpond.com>
> > > >
> > > > On Fri, 28 Feb 2020 16:56:45 +0100, Peter Seiderer <ps.report at gmx.net> wrote:
> > > >
> > > > > Hello Nathan,
> > > > >
> > > > > On Fri, 28 Feb 2020 09:39:15 -0500, Nathan Ford <nford at westpond.com> wrote:
> > > > >
> > > > > > Signed-off-by: Nathan Ford <nford at westpond.com>
> > > > > > ---
> > > > > > package/qt5/qt5webengine/qt5webengine.mk | 28 ++++++++++++++++++++++++++++
> > > > > > 1 file changed, 28 insertions(+)
> > > > > >
> > > > > > diff --git a/package/qt5/qt5webengine/qt5webengine.mk b/package/qt5/qt5webengine/qt5webengine.mk
> > > > > > index 3824738..e5f8421 100644
> > > > > > --- a/package/qt5/qt5webengine/qt5webengine.mk
> > > > > > +++ b/package/qt5/qt5webengine/qt5webengine.mk
> > > > > > @@ -60,6 +60,34 @@ QT5WEBENGINE_QMAKEFLAGS += QT_CONFIG-=alsa
> > > > > > endif
> > > > > > endif
> > > > > >
> > > > > > +ifeq ($(BR2_PACKAGE_JSONCPP),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += jsoncpp
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_LCMS2),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += lcms2
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_LIBEVENT),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += libevent
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_LIBXML2),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += libxml2
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_LIBXSLT),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += libxslt
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_PROTOBUF),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += protobuf
> > > > > > +endif
> > > > > > +
> > > > > > +ifeq ($(BR2_PACKAGE_SNAPPY),y)
> > > > > > +QT5WEBENGINE_DEPENDENCIES += snappy
> > > > > > +endif
> > > > > > +
> > > > >
> > > > > According to build/qt5webengine-5.12.7/config.summary:
> > > > >
> > > > > Optional system libraries used:
> > > > > re2 .................................. no ---> not in buildroot
> > > > > icu .................................. no ---> handled by select BR2_PACKAGE_QT5BASE_ICU but not found (version mismatch)?
> > > > > libwebp, libwebpmux and libwebpdemux . yes ---> already handled and fixed by your previous patch
> > > > > opus ................................. yes ---> already handled
> > > > > ffmpeg ............................... yes ---> already handled
> > > > > libvpx ............................... yes ---> already handled
> > > > > snappy ............................... yes ---> handled by our patch
> > > > > glib ................................. yes ---> already handled
> > > > > zlib ................................. yes ---> handled by qt5base
> > > > > minizip .............................. no
> > > > > libevent ............................. no ---> handled by our patch
> > > > > jsoncpp .............................. no ---> handled by our patch
> > > > > protobuf ............................. no ---> handled by our patch
> > > > > libxml2 and libxslt .................. no ---> handled by our patch
> > > > > lcms2 ................................ no ---> handled by our patch
> > > > > png .................................. yes ---> handled by qt5base (only in case BR2_PACKAGE_QT5BASE_PNG is set)?
> > > > > JPEG ................................. no ---> handled by qt5base (only in case BR2_PACKAGE_QT5BASE_JPEG is set)? In my config
> > > > > BR2_PACKAGE_QT5BASE_JPEG is set but not found?
> > > > > harfbuzz ............................. yes ---> handled by qt5base (only in case BR2_PACKAGE_QT5BASE_HARFBUZZ and BR2_TOOLCHAIN_HAS_SYNC_4 is set)?
> > > > > freetype ............................. yes ---> handled by qt5base
> > > > >
> > > > > So your patch is definitely an improvement and you can add my
> > > > >
> > > > > Reviewed-by: Peter Seiderer <ps.report at gmx.net>
> > > > >
> > > > > Care to take a look if the buildroot package minizip is sufficient for qt5webengine?
> > > > >
> > > > > Leaving icu, png, jpeg and harfbuzz for more research....
> > > > >
> > > > > Regards,
> > > > > Peter
> > > > >
> > > > > > # QtWebengine's build system uses python, but only supports python2. We work
> > > > > > # around this by forcing python2 early in the PATH, via a python->python2
> > > > > > # symlink.
> > > > >
> > > >
> > > _______________________________________________
> > > buildroot mailing list
> > > buildroot at busybox.net
> > > http://lists.busybox.net/mailman/listinfo/buildroot
> >
>
More information about the buildroot
mailing list