[Buildroot] [PATCH v2 8/8] configs/imx8mmevk: new defconfig

[Fabio Estevam]

Hi Xavier,

On Sat, Nov 7, 2020 at 10:59 AM Xavier Roumegue <xroumegue at gmail.com> wrote:
>
> Introduce NXP imx8mm evk board configuration that uses mainline atf,
> uboot and kernel.
>
> Mainline uboot mkimage tool generates the boot image.

Thanks for working on this series!

> +BR2_aarch64=y
> +BR2_ARM_FPU_VFPV3=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-evk"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

You missed to pass the specific kernel version like:
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.7"


> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.3"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_FW_FILES="lpddr4*.bin"
> +# BR2_TARGET_UBOOT_FORMAT_BIN is not set
> +BR2_TARGET_UBOOT_FORMAT_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_IMX_FIT=y
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin spl/u-boot-spl"

You missed to pass the specific U-Boot version like:
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"

Thanks