[Buildroot] [PATCH 1/1] board/stm32f469-disco: update board configuration
Yauheni Saldatsenka
eugentoo at gmail.com
Fri Jul 23 16:00:58 UTC 2021
Update STM32F469-disco configuration files to operate with new kernel.
Result of make tinyconfig was taken as a starting point to fit kernel
into flash memory.
Current setup fits in 2MB on-chip flash memory with rootfs
offloaded to MMC card.
Kernel features enabled:
- MMC card driver
- DRM MIPI-DSI drivers
- Random number generator
Fixes:
- Move kernel to new flash bank due to growth of dtb size
- Fix kernel start address in bootloader
- Remove outdated path which doesn't affect normal operation mode
Signed-off-by: Yauheni Saldatsenka <eugentoo at gmail.com>
---
.../stm32f469-disco/flash.sh | 47 +++-
.../stm32f469-disco/linux/defconfig | 120 +++++++++
.../stm32f469-disco/linux/stm32f469-disco.dts | 240 ++++++++++++++++++
.../0002-kernel-start-address.patch | 21 ++
.../patches/afboot-stm32/0003-no-mpu.patch | 22 ++
configs/stm32f469_disco_xip_defconfig | 24 ++
6 files changed, 465 insertions(+), 9 deletions(-)
create mode 100644 board/stmicroelectronics/stm32f469-disco/linux/defconfig
create mode 100644 board/stmicroelectronics/stm32f469-disco/linux/stm32f469-disco.dts
create mode 100644 board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0002-kernel-start-address.patch
create mode 100644 board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0003-no-mpu.patch
create mode 100644 configs/stm32f469_disco_xip_defconfig
diff --git a/board/stmicroelectronics/stm32f469-disco/flash.sh b/board/stmicroelectronics/stm32f469-disco/flash.sh
index 984d2b2599..176e1c9d2c 100755
--- a/board/stmicroelectronics/stm32f469-disco/flash.sh
+++ b/board/stmicroelectronics/stm32f469-disco/flash.sh
@@ -1,18 +1,47 @@
#!/bin/bash
OUTPUT_DIR=$1
+BUILD_TYPE=$2
-if ! test -d "${OUTPUT_DIR}" ; then
+if ! test -d "${OUTPUT_DIR}"
+then
echo "ERROR: no output directory specified."
echo "Usage: $0 OUTPUT_DIR"
exit 1
fi
-${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
- -c "init" \
- -c "reset init" \
- -c "flash probe 0" \
- -c "flash info 0" \
- -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
- -c "reset run" \
- -c "shutdown"
+if [[ -z "${BUILD_TYPE}" ]]
+then
+ echo "ERROR: no build type specified, please select 'xip' or 'uboot'."
+ echo "Usage: $0 OUTPUT_DIR $1 BUILD_TYPE"
+ exit 1
+fi
+
+case "${BUILD_TYPE}" in
+ "xip")
+ ${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
+ -c "init" \
+ -c "reset init" \
+ -c "flash probe 0" \
+ -c "flash info 0" \
+ -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469i-disco.bin 0x08000000" \
+ -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469-disco.dtb 0x08004000" \
+ -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08010000" \
+ -c "reset run" \
+ -c "shutdown"
+ ;;
+ "uboot")
+ FLASH_COMMAND=
+ ${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
+ -c "init" \
+ -c "reset init" \
+ -c "flash probe 0" \
+ -c "flash info 0" \
+ -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
+ -c "reset run" \
+ -c "shutdown"
+ ;;
+ *)
+ echo "Wrong build type. Please select from: xip, uboot"
+ ;;
+esac
diff --git a/board/stmicroelectronics/stm32f469-disco/linux/defconfig b/board/stmicroelectronics/stm32f469-disco/linux/defconfig
new file mode 100644
index 0000000000..2d0ce59b31
--- /dev/null
+++ b/board/stmicroelectronics/stm32f469-disco/linux/defconfig
@@ -0,0 +1,120 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_LOG_BUF_SHIFT=12
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=10
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_RD_ZSTD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_MULTIUSER is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_POSIX_TIMERS is not set
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_KCMP=y
+# CONFIG_RSEQ is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_STM32=y
+# CONFIG_MACH_STM32F429 is not set
+# CONFIG_MACH_STM32F746 is not set
+# CONFIG_MACH_STM32F769 is not set
+# CONFIG_MACH_STM32H743 is not set
+CONFIG_CPU_V7M_NUM_IRQ=240
+# CONFIG_ARM_DMA_MEM_BUFFERABLE is not set
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0xc0000000
+CONFIG_DRAM_SIZE=0x01000000
+CONFIG_HZ_1000=y
+# CONFIG_ATAGS is not set
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x08010000
+CONFIG_XIP_DEFLATED_DATA=y
+# CONFIG_SUSPEND is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_COMPAT_32BIT_TIME is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_BLOCK is not set
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_INPUT is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+# CONFIG_DEVMEM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MFD_STM32_TIMERS=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_SYNC_FILE=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_TRIGGERED_BUFFER=y
+CONFIG_IIO_STM32_TIMER_TRIGGER=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_SYSCTL is not set
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+# CONFIG_SYMBOLIC_ERRNAME is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/board/stmicroelectronics/stm32f469-disco/linux/stm32f469-disco.dts b/board/stmicroelectronics/stm32f469-disco/linux/stm32f469-disco.dts
new file mode 100644
index 0000000000..83fe71bbc6
--- /dev/null
+++ b/board/stmicroelectronics/stm32f469-disco/linux/stm32f469-disco.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2016 - Lee Jones <lee.jones at linaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f469.dtsi"
+#include "stm32f469-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "STMicroelectronics STM32F469i-DISCO board";
+ compatible = "st,stm32f469i-disco", "st,stm32f469";
+
+ chosen {
+ bootargs = "root=/dev/ram fbcon=map:0";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x1000000>;
+ };
+
+ aliases {
+ serial0 = &usart3;
+ };
+
+ mmc_vcard: mmc_vcard {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_vcard";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_dsi: vdd-dsi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_dsi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ soc {
+ dma-ranges = <0xc0000000 0xc0000000 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-green {
+ gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ led-orange {
+ gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
+ };
+ led-red {
+ gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
+ };
+ led-blue {
+ gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button at 0 {
+ label = "User";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ };
+};
+
+&rcc {
+ compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
+};
+
+&clk_hse {
+ clock-frequency = <8000000>;
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_out_dsi>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi at 0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ power-supply = <&vdd_dsi>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+<dc {
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint at 0 {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&timers1 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer at 0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer at 2 {
+ status = "okay";
+ };
+};
+
+&sdio {
+ status = "okay";
+ vmmc-supply = <&mmc_vcard>;
+ cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
+ broken-cd;
+ pinctrl-names = "default", "opendrain";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_pins_od>;
+ bus-width = <4>;
+};
+
+&usart3 {
+ pinctrl-0 = <&usart3_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg_fs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_fs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0002-kernel-start-address.patch b/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0002-kernel-start-address.patch
new file mode 100644
index 0000000000..614effa85b
--- /dev/null
+++ b/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0002-kernel-start-address.patch
@@ -0,0 +1,21 @@
+diff --git a/stm32f469i-disco.c b/stm32f469i-disco.c
+index 2da1f4b65f..96e4dff65e 100644
+--- a/stm32f469i-disco.c
++++ b/stm32f469i-disco.c
+@@ -6,6 +6,7 @@
+ #include "gpio.h"
+ #include "mpu.h"
+
++#define KERNEL_ADDR 0x08010000
+ #define CONFIG_HSE_HZ 8000000
+ #define CONFIG_PLL_M 8
+ #define CONFIG_PLL_N 360
+@@ -85,7 +86,7 @@ static void fmc_wait_busy(void)
+
+ void start_kernel(void)
+ {
+- void (*kernel)(uint32_t reserved, uint32_t mach, uint32_t dt) = (void (*)(uint32_t, uint32_t, uint32_t))(0x08008000 | 1);
++ void (*kernel)(uint32_t reserved, uint32_t mach, uint32_t dt) = (void (*)(uint32_t, uint32_t, uint32_t))(KERNEL_ADDR | 1);
+
+ kernel(0, ~0UL, 0x08004000);
+ }
diff --git a/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0003-no-mpu.patch b/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0003-no-mpu.patch
new file mode 100644
index 0000000000..bc66d2d0ef
--- /dev/null
+++ b/board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0003-no-mpu.patch
@@ -0,0 +1,22 @@
+diff --git a/stm32f469i-disco.c b/stm32f469i-disco.c
+index d4d0909831..03f823f288 100644
+--- a/stm32f469i-disco.c
++++ b/stm32f469i-disco.c
+@@ -127,7 +127,7 @@ int main(void)
+
+ int i;
+
+- mpu_config(0x0);
++ mpu_config(0xc0000000);
+
+ if (*FLASH_CR & FLASH_CR_LOCK) {
+ *FLASH_KEYR = 0x45670123;
+@@ -229,7 +229,7 @@ int main(void)
+ usart_setup(usart_base, 45000000);
+ usart_putch(usart_base, '.');
+
+- *SYSCFG_MEMRMP = 0x4;
++ /* *SYSCFG_MEMRMP = 0x4; */
+
+ start_kernel();
+
diff --git a/configs/stm32f469_disco_xip_defconfig b/configs/stm32f469_disco_xip_defconfig
new file mode 100644
index 0000000000..81bdb0d6d6
--- /dev/null
+++ b/configs/stm32f469_disco_xip_defconfig
@@ -0,0 +1,24 @@
+BR2_arm=y
+BR2_cortex_m4=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f469-disco/patches"
+BR2_KERNEL_HEADERS_5_13=y
+# BR2_UCLIBC_INSTALL_UTILS is not set
+BR2_GCC_VERSION_11_X=y
+BR2_GCC_ENABLE_LTO=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f469-disco/linux/defconfig"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
+BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/stmicroelectronics/stm32f469-disco/linux/stm32f469-disco.dts"
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
+BR2_PACKAGE_ZLIB=y
+BR2_TARGET_ROOTFS_INITRAMFS=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_AFBOOT_STM32=y
+BR2_PACKAGE_HOST_OPENOCD=y
+BR2_PACKAGE_HOST_UTIL_LINUX=y
--
2.32.0
More information about the buildroot
mailing list