[Buildroot] [PATCH v2 00/28] sunxi: use mainline arm-trusted-firmware

[Thomas Petazzoni]

Hello Sergey,

Thanks a lot for this work! See below some comments/doubts, though.

On Wed,  9 Jun 2021 22:59:35 +0300
Sergey Matyukevich <geomatsi at gmail.com> wrote:

> Finally, let me re-iterate once again: I have only orangepi-zero-plus2
> board at my disposal. So only this board has been tested. For all the
> other boards only build tests have been completed. ATF provides only
> basic support for H5/A64 and SCP firmware is disabled, so I do not
> expect any surprises here. But still, any help with boot tests on
> other H5/A64 sunxi boards is more than welcome.

Then, I'm not sure of the approach. Indeed, the defconfigs are really
meant to be configurations that have been tested on HW. If we start
changing them without testing them on HW, their purpose kind of goes
away. What is your plan here? Wait for the initial submitters to
confirm that the change is OK and working on HW ? It might take a
while. Or should we give up on that promise that all defconfigs have
been tested on HW ?

Thanks!

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com