[Buildroot] [PATCH v5 1/6] package/rpi-firmware: rework boot/config file handling
Peter Seiderer
ps.report at gmx.net
Tue Sep 21 20:21:32 UTC 2021
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report at gmx.net>
---
Changes v1 -> v2:
- update genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
Changes v2 -> v3:
- remove duplicated BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4 from
configs/raspberrypi4_64_defconfig
- fix BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE entry from
configs/raspberrypi4_64_defconfig
- change firmware list to one-assignment style (suggested by Yann E. MORIN)
- change firmware install to make-level foreach loop (suggested by Yann E. MORIN)
Changes v3 -> v4:
- fix config.in typo (Patch vs. Path)
- fix 64bit config.txt files (kernel image name zImage vs. Image,
previously done by 'post-image.sh --aarch64')
Changes v4 -> v5:
- rebased
- incorporate krnbt option
- add rework boot/config file handling for cm4io and cm4io_64
- update board/raspberrypi/readme.txt
---
board/raspberrypi/config_0w.txt | 29 +++++++
board/raspberrypi/config_3.txt | 29 +++++++
board/raspberrypi/config_3_64bit.txt | 32 ++++++++
board/raspberrypi/config_3_qt5we.txt | 26 +++++++
board/raspberrypi/config_4.txt | 29 +++++++
board/raspberrypi/config_4_64bit.txt | 36 +++++++++
board/raspberrypi/config_cm4io.txt | 26 +++++++
board/raspberrypi/config_cm4io_64bit.txt | 30 +++++++
.../raspberrypi/config_default.txt | 4 +-
.../raspberrypi/genimage-raspberrypi4-64.cfg | 4 +-
board/raspberrypi/genimage-raspberrypi4.cfg | 4 +-
.../genimage-raspberrypicm4io-64.cfg | 4 +-
.../raspberrypi/genimage-raspberrypicm4io.cfg | 4 +-
board/raspberrypi/post-image.sh | 33 --------
board/raspberrypi/readme.txt | 9 ++-
configs/raspberrypi0_defconfig | 3 +
configs/raspberrypi0w_defconfig | 4 +-
configs/raspberrypi2_defconfig | 3 +
configs/raspberrypi3_64_defconfig | 4 +-
configs/raspberrypi3_defconfig | 4 +-
configs/raspberrypi3_qt5we_defconfig | 4 +-
configs/raspberrypi4_64_defconfig | 2 +-
configs/raspberrypi4_defconfig | 2 +-
configs/raspberrypi_defconfig | 3 +
configs/raspberrypicm4io_64_defconfig | 2 +-
configs/raspberrypicm4io_defconfig | 2 +-
package/rpi-firmware/Config.in | 78 ++++++++-----------
package/rpi-firmware/rpi-firmware.mk | 34 +++++---
28 files changed, 334 insertions(+), 110 deletions(-)
create mode 100644 board/raspberrypi/config_0w.txt
create mode 100644 board/raspberrypi/config_3.txt
create mode 100644 board/raspberrypi/config_3_64bit.txt
create mode 100644 board/raspberrypi/config_3_qt5we.txt
create mode 100644 board/raspberrypi/config_4.txt
create mode 100644 board/raspberrypi/config_4_64bit.txt
create mode 100644 board/raspberrypi/config_cm4io.txt
create mode 100644 board/raspberrypi/config_cm4io_64bit.txt
rename package/rpi-firmware/config.txt => board/raspberrypi/config_default.txt (79%)
diff --git a/board/raspberrypi/config_0w.txt b/board/raspberrypi/config_0w.txt
new file mode 100644
index 0000000000..195bad449e
--- /dev/null
+++ b/board/raspberrypi/config_0w.txt
@@ -0,0 +1,29 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start.elf
+fixup_file=fixup.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
diff --git a/board/raspberrypi/config_3.txt b/board/raspberrypi/config_3.txt
new file mode 100644
index 0000000000..195bad449e
--- /dev/null
+++ b/board/raspberrypi/config_3.txt
@@ -0,0 +1,29 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start.elf
+fixup_file=fixup.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
diff --git a/board/raspberrypi/config_3_64bit.txt b/board/raspberrypi/config_3_64bit.txt
new file mode 100644
index 0000000000..34412fa9e8
--- /dev/null
+++ b/board/raspberrypi/config_3_64bit.txt
@@ -0,0 +1,32 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start.elf
+fixup_file=fixup.dat
+
+kernel=Image
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
+
+# enable 64bits support
+arm_64bit=1
diff --git a/board/raspberrypi/config_3_qt5we.txt b/board/raspberrypi/config_3_qt5we.txt
new file mode 100644
index 0000000000..752310b179
--- /dev/null
+++ b/board/raspberrypi/config_3_qt5we.txt
@@ -0,0 +1,26 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start.elf
+fixup_file=fixup.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=200
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
diff --git a/board/raspberrypi/config_4.txt b/board/raspberrypi/config_4.txt
new file mode 100644
index 0000000000..ea02d3f071
--- /dev/null
+++ b/board/raspberrypi/config_4.txt
@@ -0,0 +1,29 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start4.elf
+fixup_file=fixup4.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
diff --git a/board/raspberrypi/config_4_64bit.txt b/board/raspberrypi/config_4_64bit.txt
new file mode 100644
index 0000000000..41c7e97e99
--- /dev/null
+++ b/board/raspberrypi/config_4_64bit.txt
@@ -0,0 +1,36 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start4.elf
+fixup_file=fixup4.dat
+
+kernel=Image
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable autoprobing of Bluetooth driver without need of hciattach/btattach
+dtoverlay=krnbt=on
+
+dtoverlay=vc4-kms-v3d-pi4
+dtoverlay=imx219
+#dtoverlay=ov5647
+
+# enable 64bits support
+arm_64bit=1
diff --git a/board/raspberrypi/config_cm4io.txt b/board/raspberrypi/config_cm4io.txt
new file mode 100644
index 0000000000..01f60395b3
--- /dev/null
+++ b/board/raspberrypi/config_cm4io.txt
@@ -0,0 +1,26 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start4.elf
+fixup_file=fixup4.dat
+
+kernel=zImage
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
diff --git a/board/raspberrypi/config_cm4io_64bit.txt b/board/raspberrypi/config_cm4io_64bit.txt
new file mode 100644
index 0000000000..6cd8a729cd
--- /dev/null
+++ b/board/raspberrypi/config_cm4io_64bit.txt
@@ -0,0 +1,30 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start4.elf
+fixup_file=fixup4.dat
+
+kernel=Image
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
+
+# enable 64bits support
+arm_64bit=1
+
diff --git a/package/rpi-firmware/config.txt b/board/raspberrypi/config_default.txt
similarity index 79%
rename from package/rpi-firmware/config.txt
rename to board/raspberrypi/config_default.txt
index 4a92a4dd95..c09ecca1a9 100644
--- a/package/rpi-firmware/config.txt
+++ b/board/raspberrypi/config_default.txt
@@ -1,11 +1,9 @@
# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
-# You should override this file using a post-build script.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
# See http://buildroot.org/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax
-# We always use the same names, the real used variant is selected by
-# BR2_PACKAGE_RPI_FIRMWARE_{DEFAULT,X,CD} choice
start_file=start.elf
fixup_file=fixup.dat
diff --git a/board/raspberrypi/genimage-raspberrypi4-64.cfg b/board/raspberrypi/genimage-raspberrypi4-64.cfg
index 854e0c7e31..3c480e98f0 100644
--- a/board/raspberrypi/genimage-raspberrypi4-64.cfg
+++ b/board/raspberrypi/genimage-raspberrypi4-64.cfg
@@ -4,8 +4,8 @@ image boot.vfat {
"bcm2711-rpi-4-b.dtb",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
- "rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
+ "rpi-firmware/fixup4.dat",
+ "rpi-firmware/start4.elf",
"rpi-firmware/overlays",
"Image"
}
diff --git a/board/raspberrypi/genimage-raspberrypi4.cfg b/board/raspberrypi/genimage-raspberrypi4.cfg
index 60e1f23bcc..4e4742f3ef 100644
--- a/board/raspberrypi/genimage-raspberrypi4.cfg
+++ b/board/raspberrypi/genimage-raspberrypi4.cfg
@@ -4,8 +4,8 @@ image boot.vfat {
"bcm2711-rpi-4-b.dtb",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
- "rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
+ "rpi-firmware/fixup4.dat",
+ "rpi-firmware/start4.elf",
"rpi-firmware/overlays",
"zImage"
}
diff --git a/board/raspberrypi/genimage-raspberrypicm4io-64.cfg b/board/raspberrypi/genimage-raspberrypicm4io-64.cfg
index 32a7ca897d..63806d0c31 100644
--- a/board/raspberrypi/genimage-raspberrypicm4io-64.cfg
+++ b/board/raspberrypi/genimage-raspberrypicm4io-64.cfg
@@ -4,8 +4,8 @@ image boot.vfat {
"bcm2711-rpi-cm4.dtb",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
- "rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
+ "rpi-firmware/fixup4.dat",
+ "rpi-firmware/start4.elf",
"rpi-firmware/overlays",
"Image"
}
diff --git a/board/raspberrypi/genimage-raspberrypicm4io.cfg b/board/raspberrypi/genimage-raspberrypicm4io.cfg
index 5a42bcfbb4..3ee9bf551a 100644
--- a/board/raspberrypi/genimage-raspberrypicm4io.cfg
+++ b/board/raspberrypi/genimage-raspberrypicm4io.cfg
@@ -4,8 +4,8 @@ image boot.vfat {
"bcm2711-rpi-cm4.dtb",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
- "rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
+ "rpi-firmware/fixup4.dat",
+ "rpi-firmware/start4.elf",
"rpi-firmware/overlays",
"zImage"
}
diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh
index a6728c686e..6cad20fb9e 100755
--- a/board/raspberrypi/post-image.sh
+++ b/board/raspberrypi/post-image.sh
@@ -7,39 +7,6 @@ BOARD_NAME="$(basename ${BOARD_DIR})"
GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-for arg in "$@"
-do
- case "${arg}" in
- --add-miniuart-bt-overlay)
- if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- echo "Adding 'dtoverlay=miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
- cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-
-# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
-dtoverlay=miniuart-bt,krnbt=on
-__EOF__
- fi
- ;;
- --aarch64)
- # Run a 64bits kernel (armv8)
- sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
- if ! grep -qE '^arm_64bit=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-
-# enable 64bits support
-arm_64bit=1
-__EOF__
- fi
- ;;
- --gpu_mem_256=*|--gpu_mem_512=*|--gpu_mem_1024=*)
- # Set GPU memory
- gpu_mem="${arg:2}"
- sed -e "/^${gpu_mem%=*}=/s,=.*,=${gpu_mem##*=}," -i "${BINARIES_DIR}/rpi-firmware/config.txt"
- ;;
- esac
-
-done
-
# Pass an empty rootpath. genimage makes a full copy of the given rootpath to
# ${GENIMAGE_TMP}/root so passing TARGET_DIR would be a waste of time and disk
# space. We don't rely on genimage to build the rootfs image, just to insert a
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index 62cb248633..98c44d80a1 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -87,11 +87,14 @@ After building, you should obtain this tree:
| +-- bootcode.bin
| +-- cmdline.txt
| +-- config.txt
- | +-- fixup.dat
- | +-- start.elf
+ | +-- fixup.dat [1]
+ | +-- fixup4.dat [1]
+ | +-- start.elf [1]
+ | +-- start4.elf [1]
| `-- overlays/ [2]
+-- sdcard.img
- `-- zImage
+ +-- Image [1]
+ `-- zImage [1]
[1] Not all of them will be present, depending on the RaspberryPi
model you are using.
diff --git a/configs/raspberrypi0_defconfig b/configs/raspberrypi0_defconfig
index 5d611aae3f..f6e4f552fc 100644
--- a/configs/raspberrypi0_defconfig
+++ b/configs/raspberrypi0_defconfig
@@ -20,6 +20,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi0/config_default.txt"
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
# Required tools to create the SD image
diff --git a/configs/raspberrypi0w_defconfig b/configs/raspberrypi0w_defconfig
index 394ef9c574..bbe25e2874 100644
--- a/configs/raspberrypi0w_defconfig
+++ b/configs/raspberrypi0w_defconfig
@@ -16,6 +16,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi0w/config_0w.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -29,4 +32,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index 516cc378d4..79f3d98692 100644
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -22,6 +22,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi/config_default.txt"
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
# Required tools to create the SD image
diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig
index 210ded73c4..def387cacc 100644
--- a/configs/raspberrypi3_64_defconfig
+++ b/configs/raspberrypi3_64_defconfig
@@ -21,6 +21,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3-64/config_3_64bit.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -34,4 +37,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-miniuart-bt-overlay"
diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
index 58b2abcfb8..1b39ac378c 100644
--- a/configs/raspberrypi3_defconfig
+++ b/configs/raspberrypi3_defconfig
@@ -21,6 +21,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-r
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3/config_3.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -34,4 +37,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
index 24e1f53bae..2506025756 100644
--- a/configs/raspberrypi3_qt5we_defconfig
+++ b/configs/raspberrypi3_qt5we_defconfig
@@ -31,6 +31,9 @@ BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5WEBENGINE=y
BR2_PACKAGE_QT5WEBENGINE_PROPRIETARY_CODECS=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3/config_3_qt5we.txt"
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_CA_CERTIFICATES=y
BR2_PACKAGE_NTP=y
@@ -48,4 +51,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="400M"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --gpu_mem_1024=200"
diff --git a/configs/raspberrypi4_64_defconfig b/configs/raspberrypi4_64_defconfig
index 05331f7ae7..0ce05f30ef 100644
--- a/configs/raspberrypi4_64_defconfig
+++ b/configs/raspberrypi4_64_defconfig
@@ -22,6 +22,7 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi4-64/config_4_64bit.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -35,4 +36,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --aarch64"
diff --git a/configs/raspberrypi4_defconfig b/configs/raspberrypi4_defconfig
index d954c845d8..930522f20b 100644
--- a/configs/raspberrypi4_defconfig
+++ b/configs/raspberrypi4_defconfig
@@ -22,6 +22,7 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi4/config_4.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -35,4 +36,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig
index fd869693fa..8c70a2be6a 100644
--- a/configs/raspberrypi_defconfig
+++ b/configs/raspberrypi_defconfig
@@ -21,6 +21,9 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-c
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi/config_default.txt"
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
# Required tools to create the SD image
diff --git a/configs/raspberrypicm4io_64_defconfig b/configs/raspberrypicm4io_64_defconfig
index 4abff0f2d9..73bb2b98f3 100644
--- a/configs/raspberrypicm4io_64_defconfig
+++ b/configs/raspberrypicm4io_64_defconfig
@@ -22,6 +22,7 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypicm4io-64/config_cm4io_64bit.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -38,4 +39,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --aarch64"
diff --git a/configs/raspberrypicm4io_defconfig b/configs/raspberrypicm4io_defconfig
index 6fa9e5bc9f..80f509b5f9 100644
--- a/configs/raspberrypicm4io_defconfig
+++ b/configs/raspberrypicm4io_defconfig
@@ -22,6 +22,7 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypicm4io-64/config_cm4io.txt"
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
@@ -38,4 +39,3 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
diff --git a/package/rpi-firmware/Config.in b/package/rpi-firmware/Config.in
index f5a25c5680..9e401829c6 100644
--- a/package/rpi-firmware/Config.in
+++ b/package/rpi-firmware/Config.in
@@ -11,63 +11,53 @@ config BR2_PACKAGE_RPI_FIRMWARE
if BR2_PACKAGE_RPI_FIRMWARE
-choice
- bool "rpi variant"
+config BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN
+ bool "rpi 0/1/2/3 bootcode.bin"
help
- The Raspberry Pi 4 introduced a slightly different naming
- convention and set of boot files. This option controls which
- format to use.
+ The bootcode.bin for versions Zero/1/2/3 (not needed on rpi4,
+ because it has been replaced by boot code in the onboard
+ EEPROM).
config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI
- bool "rpi 0/1/2/3"
+ bool "rpi 0/1/2/3 (default)"
help
- The default set of files, for versions pre-4
+ The default set of files for versions Zero/1/2/3.
-config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4
- bool "rpi 4"
+config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI_X
+ bool "rpi 0/1/2/3 (extended)"
help
- The Raspberry Pi 4 files
-endchoice
+ The extended set of files for versions Zero/1/2/3 (additional
+ GPU features, eg. more audio/video codecs).
-choice
- bool "Firmware to boot"
- default BR2_PACKAGE_RPI_FIRMWARE_DEFAULT
+config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI_CD
+ bool "rpi 0/1/2/3 (cut-down)"
help
- There are three different firmware files:
- - the default firmware, that enables standard GPU
- features;
- - the extended firmware, that enables additional GPU
- features (eg. more audio/video codecs);
- - the cut-down firmware, for emergency situations, with
- only features required to boot a Linux kernel.
-
-config BR2_PACKAGE_RPI_FIRMWARE_DEFAULT
- bool "default"
+ The cut-down set of files for versions Zero/1/2/3 (only
+ features required to boot a Linux kernel).
+
+config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4
+ bool "rpi 4 (default)"
+ help
+ The default set of files for versions 4 (standard GPU
+ features).
+
+config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_X
+ bool "rpi 4 (extended)"
help
- The default firmware, that enables standard GPU features.
+ The extended set of files for versions 4 (additional GPU
+ features, eg. more audio/video codecs).
-config BR2_PACKAGE_RPI_FIRMWARE_X
- bool "extended ('x', more codecs)"
+config BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_CD
+ bool "rpi 4 (cut-down)"
help
- The extended firmware, that enables additional GPU features
- (eg. more audio/video codecs).
+ The cut-down set of files for versions 4 (only features
+ required to boot a Linux kernel).
-config BR2_PACKAGE_RPI_FIRMWARE_CD
- bool "cut-down ('cd', emergency)"
+config BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE
+ string "Path to a file stored as boot/config.txt"
help
- The cut-down firmware, for emergency situations, with only
- features required to boot a Linux kernel.
-
-endchoice
-
-config BR2_PACKAGE_RPI_FIRMWARE_BOOT
- string
- default "" if BR2_PACKAGE_RPI_FIRMWARE_DEFAULT && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI
- default "4" if BR2_PACKAGE_RPI_FIRMWARE_DEFAULT && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4
- default "_x" if BR2_PACKAGE_RPI_FIRMWARE_X && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI
- default "4x" if BR2_PACKAGE_RPI_FIRMWARE_X && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4
- default "_cd" if BR2_PACKAGE_RPI_FIRMWARE_CD && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI
- default "4cd" if BR2_PACKAGE_RPI_FIRMWARE_CD && BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4
+ Path to a file stored as config.txt in the boot partiton
+ of the generated SD card image.
config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
bool "Install Device Tree Blobs (DTBs)"
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 6a2bf05248..38a84100e9 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -10,6 +10,27 @@ RPI_FIRMWARE_LICENSE = BSD-3-Clause
RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
RPI_FIRMWARE_INSTALL_IMAGES = YES
+RPI_FIRMWARE_FILES = \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN), bootcode.bin) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI), start.elf fixup.dat) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI_X), startx.elf fixupx.dat) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI_CD), start_cd.elf fixup_cd.dat) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4), start4.elf fixup4.dat) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_X), start4x.elf fixup4x.dat) \
+ $(if $(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_CD), start4cd.elf fixup4cd.dat)
+
+define RPI_FIRMWARE_INSTALL_BIN
+ $(foreach f,$(RPI_FIRMWARE_FILES), \
+ $(INSTALL) -D -m 0644 $(@D)/boot/$(f) $(BINARIES_DIR)/rpi-firmware/$(f)
+ )
+endef
+
+ifneq ($(BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE),)
+define RPI_FIRMWARE_INSTALL_CONFIG
+ $(INSTALL) -D -m 0644 $(BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE) $(BINARIES_DIR)/rpi-firmware/config.txt
+endef
+endif
+
ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
define RPI_FIRMWARE_INSTALL_DTB
$(foreach dtb,$(wildcard $(@D)/boot/*.dtb), \
@@ -41,19 +62,10 @@ define RPI_FIRMWARE_INSTALL_TARGET_CMDS
endef
endif # INSTALL_VCDBG
-ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI),y)
-# bootcode.bin is not used on rpi4, because it has been replaced by boot code in the onboard EEPROM
-define RPI_FIRMWARE_INSTALL_BOOTCODE_BIN
- $(INSTALL) -D -m 0644 $(@D)/boot/bootcode.bin $(BINARIES_DIR)/rpi-firmware/bootcode.bin
-endef
-endif
-
define RPI_FIRMWARE_INSTALL_IMAGES_CMDS
- $(INSTALL) -D -m 0644 package/rpi-firmware/config.txt $(BINARIES_DIR)/rpi-firmware/config.txt
$(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt
- $(INSTALL) -D -m 0644 $(@D)/boot/start$(BR2_PACKAGE_RPI_FIRMWARE_BOOT).elf $(BINARIES_DIR)/rpi-firmware/start.elf
- $(INSTALL) -D -m 0644 $(@D)/boot/fixup$(BR2_PACKAGE_RPI_FIRMWARE_BOOT).dat $(BINARIES_DIR)/rpi-firmware/fixup.dat
- $(RPI_FIRMWARE_INSTALL_BOOTCODE_BIN)
+ $(RPI_FIRMWARE_INSTALL_BIN)
+ $(RPI_FIRMWARE_INSTALL_CONFIG)
$(RPI_FIRMWARE_INSTALL_DTB)
$(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS)
endef
--
2.33.0
More information about the buildroot
mailing list